EVIL ENERGY 1" Fuel Transfer Hose 20 ft — 1" ID Farm Fuel Hose for Diesel, Gasoline, Kerosene, 150 PSI

EVIL ENERGY 1" Fuel Transfer Hose 20FT is a heavy-duty, 1-inch internal diameter fuel dispensing hose built for safe transfer of diesel, gasoline, kerosene and biodiesel blends.

This hose combines a nitrile-rubber inner tube, stainless-steel braid reinforcement and a PVC/nitrile blended outer cover to deliver flexibility, abrasion resistance and chemical compatibility for farm, commercial and industrial fueling tasks. It is rated for a working pressure of 150 PSI, has a 300 mm minimum bending radius and operates across a wide temperature range, making it suitable for on-site fuel transfer, pump hookups and tank-to-tank dispensing.

How robust is the hose for heavy farm and industrial use?

The hose is engineered for demanding environments with a stainless-steel braid that prevents kinking while increasing burst strength. The exterior cover resists abrasion, and the nitrile inner is chosen for fuel resistance and low permeation.

• Construction: nitrile inner, stainless-steel braid, PVC/nitrile outer.
• Strength: 150 PSI working pressure; 435 PSI burst pressure.
• Durability: abrasion-resistant outer and 300 mm minimum bend radius.

Which fuels and fluids can I safely transfer through this hose?

This hose is compatible with a broad range of petroleum products and common fuel blends, including biodiesel and ethanol-containing fuels. It is suitable for diesel, gasoline, kerosene, mineral spirits, oils, and many biodiesel percentages up to 100% biodiesel when used according to industry practices.

• Compatible with diesel, gasoline, kerosene and petroleum-based oils.
• Works with biodiesel blends (B20 and up to B100) and ethanol blends like E10–E85.
• Also suitable for grease and some solvent applications; always verify chemical compatibility for specialty fluids.

What are the dimensional and temperature limits I should expect?

The hose measures 1-inch inside diameter and 35.5 mm outside diameter, with a 20-foot (6 m) length that fits common fueling layouts. It performs across a wide thermal span, so it remains flexible in cold weather and stable at elevated temperatures typical of fuel handling.

• Size: 1" ID (25 mm); OD: 35.5 mm; length: 20 ft (6 m).
• Bend radius: minimum 300 mm to avoid kinks.
• Temperature range: -40°F to 212°F for versatile field use.

How should I use and maintain this hose for longest service life?

Use the hose only with compatible fuels and avoid sharp bends, dragging over abrasive surfaces, or exposure to open flames. Routinely inspect fittings, clamps and the cover for wear; replace the hose if the inner tube shows swelling, cracking, or severe abrasion.

• Install with proper fittings and avoid overtightening or misaligned couplings.
• Flush after transferring reactive fluids and drain before storage to prevent degradation.
• Store coiled on a reel or shelf away from UV and chemicals; replace when damaged or aged.

Who is this for: EVIL ENERGY's 1" x 20FT Fuel Transfer Hose is designed for farmers, fleet operators, fuel distributors, and maintenance crews who need a reliable, fuel-compatible hose for refueling equipment, transferring product between tanks, or connecting pumps. If you require a flexible, reinforced hose with broad chemical compatibility and a robust working pressure for on-site fueling tasks, this model is a practical choice. Always match the hose to your fittings, follow safety procedures for fuel handling, and verify compatibility when using specialty solvents or additives.