EVIL ENERGY 16-Row Aluminium Oil Cooler Kit - 10AN Universal, Compact High-Capacity Cooling

EVIL ENERGY’s 16-row aluminium oil cooler kit is a universal, high-capacity stacked-plate cooler with 10AN fittings designed to lower oil temperatures in engines, transmissions, and differentials.

This kit combines a compact 16-row aluminium radiator, high-pressure nylon-braided hoses, and all necessary fittings to add dedicated cooling capacity where factory systems need extra help. Built for universal fit and durability, the cooler measures 12.91" × 5.71" × 1.97" and holds 0.39 L of oil. It’s a practical upgrade for heavier towing, motorsport, off-road use, or any application that benefits from reduced oil temperature and improved lubricant longevity.

How will this oil cooler fit my vehicle?

The EVIL ENERGY cooler is designed as a universal solution that mounts to most vehicles using a 330mm engine oil cooler bracket pattern. Because it is compact, many users install it in front of the radiator or on the bumper for optimal airflow. Before ordering, confirm that your chosen mounting location exceeds the cooler’s footprint to avoid clearance problems.

• Cooler dimensions: 12.91" × 5.71" × 1.97" — check physical clearance.
• Compatible with 330mm oil cooler bracket patterns on many vehicles.
• May require additional fittings or adaptors depending on factory hoses.
• Includes installation instructions for straightforward mounting.

What are the construction and performance specifications?

The core is an aluminium stacked-plate design offering high thermal transfer in a slim profile, backed by test and burst pressure ratings for reliability. The cooler holds 0.39 liters of oil and is rated to withstand typical engine bay pressures and thermal cycling. Hoses are nylon-braided with a CPE inner layer to resist heat, abrasion, and oil exposure.

• Material: lightweight aluminium alloy core for efficient cooling.
• Test pressure: 116 PSI and burst pressure: 232 PSI for durability.
• Hoses: one 3.3 ft and one 3.9 ft nylon-braided hose, 500 PSI working pressure.
• Operating temperature range: -40°F to 257°F for broad climate use.

Which systems can this cooler service and how does it help?

This oil cooler is suitable for engine oil, automatic transmission fluid, and rear differential oil when plumbing and fittings allow. By lowering operating oil temperatures, it reduces thermal stress on lubricants and components, helping maintain viscosity and protect seals under load. Use appropriate adaptors and routing to ensure proper flow and safe installation.

• Usable for engines, transmissions, and differential cooling when plumbed correctly.
• 16-row stacked plates maximize contact area for faster heat rejection.
• Compact footprint allows installation where space is limited.
• 10AN fittings provide secure, leak-resistant connections when installed properly.

What should I know about installation and maintenance?

Install in a ventilated area with direct airflow for best performance; the front bumper or ahead of the main radiator is common. Verify hose length and routing to avoid kinks or heat sources, and confirm clearance around moving parts. Periodic inspection for leaks and hose wear will keep the system reliable.

• Recommended mounting: well-ventilated area with good airflow.
• Check clearance if mounting on front bumper or radiator support.
• Inspect hoses and fittings regularly for wear or leakage.
• Some vehicles may need additional fittings or adaptors included in the kit.

Who is this for? The EVIL ENERGY 16-row oil cooler kit suits owners upgrading cooling capacity on trucks, SUVs, performance cars, or race and off-road vehicles. It’s aimed at drivers who tow, haul, or push their vehicles harder than stock conditions, and who want a compact, durable cooler that fits many installations. Mechanics and DIY installers will appreciate the complete kit layout and clear dimensions; confirm fitment and required adaptors before purchase for a smooth installation.