EVIL ENERGY 25-Row Stacked-Plate Oil Cooler 10AN — 25-Row Aluminum, Compact 1.97" Thickness

EVIL ENERGY's 25-row 10AN stacked-plate oil cooler is a compact, high-capacity aluminum unit designed to lower oil temperatures for engines, transmissions, and differentials.

This 25-row stacked-plate cooler from EVIL ENERGY delivers concentrated cooling performance in a slim footprint. Built from aluminum alloy with a 10AN port configuration, the cooler holds 0.58 liters of oil, is pressure-tested to 116 PSI and rated for burst strength up to 232 PSI. At 12.91" × 7.4" × 1.97" it fits into tight bays where airflow is available, and it ships with installation guidance to simplify mounting and plumbing.

How does the stacked-plate design improve oil cooling?

The stacked-plate architecture increases the oil-to-air surface area without adding much thickness, which helps dissipate heat more efficiently than a simple tube cooler. Multiple narrow channels create turbulence and longer flow paths, encouraging faster heat transfer while keeping oil pressure stability.

• 25 thin aluminum plates for extensive heat-transfer surface area
• Compact 1.97" thickness for tight engine bay fitment
• 10AN ports for robust, leak-resistant hose connections

Can this cooler be used for engine oil, transmission fluid, or differentials?

Yes — the EVIL ENERGY cooler is designed as a universal auxiliary cooler suitable for engine oil, transmission fluid, and rear differential use. It works best when mounted where it can receive steady airflow; some vehicles may need additional brackets or fittings depending on clearance and hose routing.

• Universal application: engine, transmission, and differential cooling
• Requires appropriate fittings, hoses, and clearance for specific vehicles
• Installation instructions included to guide placement and plumbing

What are the key specifications and safety ratings?

The cooler is fabricated from aluminum alloy to balance weight and thermal conductivity. It holds approximately 0.58 liters of oil and has been pressure-tested to 116 PSI, with a burst rating of 232 PSI for additional safety margin under extreme conditions.

• Capacity: 0.58 L oil volume
• Test pressure: 116 PSI; burst pressure: 232 PSI
• Overall dimensions: 12.91" × 7.4" × 1.97" with 10AN porting

How easy is it to install and where should it be mounted?

Installation is straightforward for someone comfortable with basic automotive plumbing. Mount the cooler where it will receive direct airflow — front bumper area or in front of a fan are common locations — and verify enough clearance for hoses and fittings. The product includes installation instructions, but check for vehicle-specific brackets or adapters you might need.

• Mount in a high-airflow spot: front bumper, intercooler area, or radiator support
• Check clearance for 10AN hoses and potential accessories before final mounting
• Includes installation instructions; additional vehicle-specific hardware may be required

Who is this for: The EVIL ENERGY 25-row 10AN stacked-plate oil cooler suits performance enthusiasts, tow vehicle owners, and anyone running heavy loads or repeated high-temperature cycles who need a compact, efficient oil cooling solution. It is ideal when space is limited but cooling performance is critical. If you plan to fit the unit, confirm airflow availability and any vehicle-specific brackets or hose adapters required before installation to ensure a smooth setup.