EVIL ENERGY 3/4" Fuel Transfer Hose 12 ft — Nitrile Lined, Stainless-Steel Braid, 150 PSI

EVIL ENERGY 3/4" Fuel Transfer Hose (12 ft) is a reinforced fuel-dispensing hose built to transfer diesel, gasoline, kerosene and biodiesel reliably across farm, shop and vehicle refueling tasks.

This 3/4" (19 mm) ID, 12-foot (3.6 m) hose combines a nitrile rubber inner lining, stainless-steel braid reinforcement and a PVC/nitrile outer cover to resist fuel swelling, abrasion and kinking. Engineered for temperature extremes from -40 °F to 212 °F and a working pressure of 150 PSI, it’s designed to handle everything from standard diesel to high-ethanol blends and up to 100% biodiesel in everyday fueling and transfer applications.

How tough is this hose for repeated farm use?

The EVIL ENERGY hose is built with a stainless-steel braid and a nitrile inner tube that resists permeation and chemical attack from petroleum and biofuels. Its outer PVC/nitrile blend provides abrasion protection for rough outdoor environments, while the 220 mm minimum bending radius reduces kinks during handling.

• Working pressure: 150 PSI; bursting pressure: 435 PSI
• Min. bending radius: 220 mm to avoid pinching
• Outer cover resists abrasion and weathering
• Stainless-steel braid for increased tensile strength

What fuels and fluids can I safely transfer with it?

This hose accepts a wide range of fuels and related liquids commonly used on farms and at fueling stations. Its nitrile construction is compatible with diesel, gasoline, kerosene and petroleum oils, and it is also specified for biodiesel blends including B-20 and up to E100 ethanol mixtures.

• Diesel, gasoline, kerosene and mineral spirits
• Biodiesel: B-20 through E100 compatibility
• E10, E15, E85 and other ethanol blends supported
• Also suitable for some greases and oils (verify chemical compatibility)

How easy is it to handle, install and maintain?

The hose’s 3/4" inner diameter balances flow rate and flexibility for common pump and nozzle setups, while the 12-foot length gives reach without excessive bulk. Its construction tolerates flexing in cold and hot conditions, and routine inspection for abrasion or cracking is the primary maintenance step.

• Length: 12 ft (3.6 m) for convenient reach
• ID: 3/4" (19 mm); OD: 28 mm for standard fittings
• Temperature range: -40 °F to 212 °F for year-round use
• Inspect periodically for wear; replace if braid or cover damaged

Will it work with my existing pump or nozzle setup?

The hose outer diameter and 3/4" ID are compatible with most farm pumps, transfer nozzles and fittings used for fueling tractors, tanks and portable drums. Confirm your fittings’ thread type and coupling size before installation, and use proper clamps or crimp fittings as required by your pump manufacturer.

• ID 3/4" matches common 3/4" pump ports and nozzles
• OD 28 mm fits many hose clamps and adapters
• Use recommended clamps/crimps to secure fittings
• Verify thread/coupling compatibility prior to final hookup

Who is this for: Farmers, mechanics, fleet managers and small fueling operations who need a robust, all-purpose transfer hose for diesel, gasoline, kerosene and biodiesel will find the EVIL ENERGY 3/4" x 12 ft hose a practical choice. It’s especially useful where temperature resilience, abrasion resistance and chemical compatibility are important for frequent fueling or fluid-transfer work.