EVIL ENERGY 3/4 in Fuel Transfer Hose 14 ft — 150 PSI, nitrile inner with stainless-steel braid for diesel and gasoline

EVIL ENERGY 3/4" Fuel Transfer Hose (14 ft) is a heavy-duty, multi-fuel dispensing hose built for safe, flexible transfer of diesel, gasoline, kerosene and biodiesel in farm and industrial settings.

Designed to meet the demands of on-site fueling, tank filling, and fuel pump hookups, this 3/4" (19 mm) ID hose combines a nitrile rubber inner tube, stainless steel braid reinforcement, and a PVC/nitrile blended outer cover to resist fuel attack and abrasion. With a 14-foot length (4.3 m), 150 PSI working pressure, and a wide operating range from -40°F to 212°F, it’s engineered for year-round use on farms, job sites, or mobile refueling rigs.

How durable is this hose for regular farm and industrial use?

The construction balances flexibility and strength: a fuel-resistant nitrile inner layer resists swelling and degradation while the stainless steel braid provides burst and kink protection. The outer PVC/nitrile blend adds abrasion and weather resistance so the hose lasts under rough handling.

• Inner tube: nitrile rubber resists petroleum and biodiesel blends
• Reinforcement: stainless steel braid for added burst resistance
• Outer cover: PVC/nitrile blend protects against abrasion and sunlight
• Working pressure: 150 PSI; bursting pressure: 435 PSI

Which fuels and fluids are compatible with this EVIL ENERGY hose?

This hose is specified for a wide range of hydrocarbon fuels and common fuel blends, making it suitable for diesel, gasoline, kerosene and many biodiesel grades. It is also compatible with ethanol blends and certain petroleum-based oils and solvents used in fueling operations.

• Diesel, gasoline, kerosene and propane applications
• Biodiesel: B-20 and up to E100/B100 compatibility listed
• Ethanol blends including E10, E15, E85 supported
• Accepts mineral spirits, oils, and some petroleum-based fluids

How flexible and easy to install is the 14-foot, 3/4" hose?

The 3/4" ID and 14 ft length provide a good balance between flow capacity and maneuverability for most pump and tank setups. With a minimum bending radius of 220 mm it remains flexible in cold weather while resisting kinking during routine handling and connection.

• Size: 3/4" (19 mm) ID; 28 mm OD for standard fittings
• Length: 14 ft (4.3 m) fits tank-to-pump runs without extensions
• Min. bending radius: 220 mm supports low-temperature use
• Temperature range: -40°F to 212°F for season-long reliability

What safety and performance specs should I verify before use?

Confirm fittings and clamps match the 3/4" ID and pressure ratings of your system. Because the hose supports many fuel chemistries, check compatibility with any specialty fluids and use appropriate vapor recovery or grounding practices when dispensing flammable liquids.

• Ensure connectors match 3/4" ID hose and are rated for 150 PSI or higher
• Observe local codes for grounding and vapor recovery during fueling
• Inspect hose for chafing or damage before each use to maintain safety
• Replace if outer cover, braid, or inner tube shows wear or leaks

Who is this for: The EVIL ENERGY 3/4" Fuel Transfer Hose (14 ft) is aimed at farmers, fleet operators, contractors and fueling professionals who need a rugged, fuel-compatible hose for onsite dispensing and tank transfers. It suits users who require a mid-length hose with high chemical compatibility and reliable pressure ratings for diesel, gasoline, biodiesel and common fuel blends. Choose this hose when you want a balance of flow capacity, flexibility in cold weather, and reinforced construction for demanding field use.