EVIL ENERGY 8AN Braided Fuel Line Kit 20FT Black — Nylon CPE Hose with Aluminum 8AN Swivel Fittings

EVIL ENERGY 8AN Fuel Line Kit is a complete 20-foot nylon-braided CPE fuel hose set with aluminum 8AN swivel fittings and clamps designed for high-pressure automotive fluid routing.

This 8AN braided fuel line kit supplies everything you need to route fuel, oil, transmission fluid, vacuum lines or cooler lines in custom and replacement applications. Built with a CPE rubber inner core, 304 stainless wire reinforcement and a nylon outer braid, the hose balances flexibility and abrasion resistance while fittings and swivel hose ends use lightweight aluminum for corrosion resistance and easier installation. The kit’s pressure and temperature ratings, assorted swivel end angles, and included separators let you tailor runs in tight engine bays or race builds.

How durable is the hose for automotive and racing use?

The hose combines a CPE rubber inner tube with a 304 stainless steel wire layer and a nylon outer braid for abrasion protection and structural strength. It’s rated to a maximum working pressure of 750 psi and a burst pressure of 2250 psi, suitable for many fuel, oil and coolant routing situations under load.

• CPE inner resists common automotive fluids and fuels
• 304 stainless wire adds tensile strength and kink resistance
• Nylon outer braid protects against abrasion and engine-bay wear
• Temperature range from -22°F to 248°F for varied climates

What fittings and lengths are included for a full installation?

The kit arrives with 20 feet of 8AN braided hose (0.41" ID, 0.64" OD), multiple swivel hose ends and accessory fittings so you can complete most custom runs without sourcing extras. Swivel ends include straight, 45°, 90° and 180° orientations to reduce hose twisting and adapt to tight routing.

• 10 × 8AN swivel hose ends: 4 straight, 2×45°, 2×90°, 2×180°
• 6 × 8AN hose separator clamps for neat bundling and mounting
• 2 × 8AN to 8AN fittings for inline connections or repairs
• 20 feet of pre-measured 8AN braided hose for flexible routing

Can this hose handle different fluids and installation environments?

Yes — material compatibility and construction make this hose suitable for fuel, race gas, diesel, oil, hydraulic fluid, transmission fluid, coolant lines and vacuum duties in many automotive applications. The kit’s fittings are aluminum alloy, chosen for a balance of light weight and corrosion resistance, and clamps help secure runs against vibration and movement.

• Compatible with fuel, diesel, oils, hydraulic and transmission fluids
• Aluminum fittings reduce weight and resist rust compared with steel
• Included separators and clamps minimize chafing and hose movement
• Works in street, performance and track environments within rated limits

Who is this for? If you’re a DIY mechanic, performance builder or workshop technician needing a versatile 8AN hose system for fuel delivery, return lines, oil feed, turbo cooler lines or transmission cooler setups, this EVIL ENERGY kit gives a practical mix of hose, swivel ends and mounting hardware. It’s aimed at users who want to replace worn lines, build custom plumbing runs, or outfit a race car while keeping cost and assembly flexibility in mind. Always follow proper installation practices, torque specifications and check compatibility with your system’s fluids and fittings before use.