EVIL ENERGY 8AN Fuel Line Kit — 20ft Nylon-Braided CPE Hose with 10 Aluminum Swivel Fittings, 750 PSI

This complete 8AN hose and fitting kit supplies a flexible, durable fluid route for performance vehicles, marine setups, or custom machinery. The hose combines a CPE inner tube, 304 stainless reinforcement and a nylon outer braid for extra abrasion resistance and temperature tolerance. Included swivel fittings in multiple angles let you route lines cleanly and make leak-free connections without costly adapters.

What fluids and systems is this 8AN hose compatible with?

The EVIL ENERGY 8AN kit is formulated for a wide range of automotive and industrial fluids. It works with gasoline (including race gas), diesel, transmission fluid, engine oil, hydraulic fluid, coolant, and vacuum lines. Avoid prolonged exposure to incompatible solvents—check fluid manufacturer recommendations when in doubt.

• Fuel supply and return lines for performance or retrofit fuel systems
• Transmission cooler and oil feed/return lines
• Vacuum and fuel-gauge lines where flexible routing is needed
• Turbo cooler or intercooler fluid plumbing with compatible fluids

How durable is the hose and what pressure/temperature can it handle?

This hose assembly balances flexibility with strength: a CPE inner core resists fuel swell, a stainless wire layer provides burst protection, and the nylon braid guards against cuts and abrasion. The working pressure is rated up to 750 PSI with a burst pressure around 2250 PSI, and it operates across a wide temperature range for most automotive uses.

• Maximum working pressure: 750 PSI for routine operations
• Burst pressure: approximately 2250 PSI for safety margin
• Temperature range: -22°F to 248°F for broad environment compatibility
• Hose dimensions: 0.41" ID and 0.65" OD for standard 8AN flow capacity

What fittings and accessories are included, and how do they simplify installation?

The kit ships with ten pre-assembled 8AN swivel hose ends in straight and angled orientations so you can build clean runs without cutting threads or sourcing separate adapters. Also included are hose separator clamps and the full 20-foot length of pre-braided hose to cut to fit your project. The aluminum alloy fittings are lightweight and resist corrosion while allowing secure, reusable connections.

• 10 swivel hose ends: 4 straight, 2 x 45°, 2 x 90°, 2 x 180° for versatile routing
• 20 feet of 8AN braided hose, ready to measure and trim
• Two hose separator clamps for neat bundling and vibration control
• Aluminum alloy fittings for strong, reusable connections

Who is this for? If you’re a DIY mechanic, race team, fabricator or marine technician who needs a reliable, adaptable 8AN fluid line solution, this EVIL ENERGY kit gives you the hose, fittings and hardware to build custom runs quickly. It’s intended for performance plumbing tasks—fuel, oil, transmission cooling, vacuum and similar fluid duties—where flexibility, abrasion resistance and higher working pressures matter. For critical or regulated systems consult application-specific guidelines and select compatible materials for the fluids you’ll run.