EVIL ENERGY AN6 Braided Fuel Line Kit — 20ft Nylon‑Braid Hose with 14 AN6 Fittings, Stainless Reinforced

EVIL ENERGY 6AN Fuel Line Kit is a complete 20-foot AN6 braided hose system with 14 fittings designed for fuel, oil, coolant and transmission cooler lines.

This kit combines a CPE rubber core, 304 stainless steel wire reinforcement and an outer nylon braid to deliver a durable, bendable hose rated for demanding automotive and motorsport plumbing. It’s supplied with a broad assortment of 6AN swivel hose ends and adapters so you can build, repair or reroute fuel supply, return, oil feed and transmission cooler circuits without hunting down multiple parts.

What applications is this 6AN fuel line kit suitable for?

Use this kit across many vehicle and equipment plumbing needs where an AN6 line is appropriate. It supports fuel, oil, transmission fluid, vacuum and coolant duties in street, race and industrial contexts when AN6 fittings are the chosen standard.

• Fuel supply and return lines for engines and carburetors.
• Transmission and oil cooler feed/return plumbing.
• Vacuum, gauge, turbo cooler and hydraulic auxiliary lines.
• Compatible with diesel, gasoline, race gas, ATF and many oils.

How strong and heat-resistant is the hose?

The hose construction balances flexibility with high working pressure and temperature tolerance. It has a maximum working pressure of 750 psi and a burst rating of 2250 psi, suitable for most aftermarket plumbing tasks.

• Temperature range from -22°F to 248°F for varied climates.
• CPE rubber inner core resists fuels and oils.
• 304 stainless wire layer provides pressure strength and kink resistance.
• Nylon braid offers abrasion protection and clean appearance.

Which fittings and hardware are included in the package?

The kit arrives with a comprehensive set of 14 fittings and accessories so you can assemble multiple runs or replace sections quickly. Fittings are aluminum AN6 swivel ends for ease of installation and leak-resistant sealing when properly assembled.

• 10x 6AN swivel hose ends: 4 straight, 2 × 45°, 2 × 90°, 2 × 180°.
• 2x 6AN hose separator clamps to secure hose runs neatly.
• 2x 6AN-to-6AN adapters for inline connections or repairs.
• 1x 20-foot length of 6AN braided hose (0.31" ID, 0.56" OD) ready to cut to fit.

How do I install and maintain these AN6 braided lines?

Installation requires cutting the hose cleanly and assembling the swivel ends with the included adapters; basic tools and AN hose assembly knowledge are recommended. Routine inspection for chafing and secure clamps will extend service life.

• Trim hose squarely with a fine-tooth blade or hose cutter for clean fittings.
• Hand-tighten swivel fittings, then torque per AN specifications if available.
• Use the provided clamps and protective routing away from heat and sharp edges.
• Inspect periodically for abrasion, swelling, or leaks and replace as needed.

Who is this for: This EVIL ENERGY 6AN Fuel Line Kit is aimed at DIY mechanics, tuners, race teams and fleet technicians who need a versatile, high-pressure AN6 hose solution with a full set of swivel fittings. It’s well suited to anyone building or repairing fuel, oil, transmission cooler, vacuum or coolant runs and who prefers a ready-made kit that reduces parts sourcing and downtime.