EVIL ENERGY AN8 Braided Fuel Hose 20FT Black — CPE Core, 750 PSI High-Pressure Nylon Jacket

EVIL ENERGY's AN8 braided fuel line is a 20-foot, high-pressure hose built with a CPE inner core, 304 steel braid, and nylon outer jacket for durable fuel, oil, and hydraulic routing.

This 8AN (AN8) braided fuel hose delivers a balance of strength, heat tolerance, and flexibility for performance and maintenance tasks. Designed to meet the demands of automotive, racing, and industrial applications, the hose resists bursting and handles a wide temperature range while remaining compatible with many fluids. Its 0.41" inner diameter and 0.65" outer diameter make it suitable for standard AN8 swivel fittings and common fluid-transfer uses.

How tough is this hose under pressure and heat?

The construction targets reliability: a CPE inner tube resists chemical attack, a 304 stainless steel wire braid provides mechanical strength, and a nylon jacket protects against abrasion and UV. The hose is rated to 750 PSI working pressure with a 2,250 PSI burst rating, plus a usable temperature window from -22°F to 248°F.

• Working pressure: 750 PSI for continuous service
• Burst pressure: 2,250 PSI for safety margin
• Temperature range: -22°F to 248°F for broad climate use
• 304 stainless braid resists kinking and adds tensile strength

What fluids and systems can I use it with?

This braided line is formulated to accept a wide range of automotive and industrial fluids without rapid degradation. It works with fuels, diesel, oil, transmission fluids, hydraulic fluids, race gas, coolant return lines (non-pressurized), vacuum lines, and turbo cooling circuits when fittings and system parameters are appropriate.

• Compatible with gasoline, diesel, and race fuels
• Suitable for engine oil and transmission fluids
• Accepts hydraulic fluids and vacuum applications
• Not intended for unknown aggressive chemicals without testing

What are the size details and how do I install it?

The hose measures 20 feet in total length with an inner diameter of 0.41 inches and outer diameter of 0.65 inches, matching standard AN8 swivel hose ends. Installation instructions are included; the hose requires AN8 swivel fittings and should be routed to avoid sharp edges, excessive bends, or heat sources that exceed the rated temperature.

• Length: 20 feet — long enough for many routed systems
• Inner diameter: 0.41" (AN8 nominal ID)
• Outer diameter: 0.65" — fits AN8 clamps and guides
• Requires AN8 swivel hose ends for proper fittings

How does construction affect longevity and maintenance?

The layered build—CPE inner tube, 304 steel braid, nylon outer braid—offers resistance to abrasion, pressure cycles, and common automotive fluids, which helps extend service life under typical operating conditions. Regular inspections for chafing, connector integrity, and heat exposure will maximize lifespan; replace the hose if you see inner swelling, cracks, or braid separation.

• CPE inner layer resists oil and fuel swell
• Stainless wire braid maintains pressure capacity over time
• Nylon outer jacket reduces abrasion and UV wear
• Inspect fittings and routing every service interval

Who is this for: EVIL ENERGY's AN8 braided fuel line suits mechanics, racers, tuners, and DIY vehicle builders who need a robust, flexible supply or return line for fuel, oil, or hydraulic circuits. Pick this hose when you want a long 20-foot run, reliable 750 PSI working pressure, and compatibility with common AN8 swivel fittings; professionals and serious enthusiasts will appreciate the durable materials and broad fluid compatibility.