EVIL ENERGY Marine Fuel Hose 1/4" 10ft Type A1-15 — SAE J1527, low-permeation NBR rubber

EVIL ENERGY 1/4" Marine Fuel Line Hose Type A1-15 is a 10-foot rubber fuel hose built to SAE J1527 and ISO 7840 standards for safe, low-permeation fuel delivery on pleasure boats and marine engines.

This 10-foot, 1/4-inch marine fuel line combines an NBR inner tube, NBR+PVC outer jacket, and polyester braid reinforcement to deliver reliable fuel transfer for outboards, stern drives, and small inboard engines. Designed to handle gasoline, diesel and ethanol blends (including E85), it meets W/EPA and CARB very low permeation requirements and resists weathering and UV exposure. With a working pressure rated up to 300 PSI and a wide operating temperature range, this hose is intended for marine environments where durability and compliance matter.

How does this hose stand up to marine conditions?

The hose uses materials selected for fuel compatibility and environmental resistance: an NBR inner layer resists fuels and an NBR+PVC outer jacket resists sunlight and ozone. Polyester braid reinforcement adds tensile strength and pressure resistance to withstand the stresses of installation and vibration on boats.

• UV- and weather-resistant outer jacket for long-term exposure
• Polyester braid reinforcement prevents collapse and extends service life
• Meets NMMA/CE accepted standards for marine applications

What fuels and temperatures is the hose compatible with?

This marine fuel line is formulated to work with gasoline, diesel, and ethanol blends such as E85, providing broad compatibility for different engine types. Temperature performance spans from -20°F to 221°F (-30°C to 105°C), covering typical marine operating conditions in temperate and cold climates.

• Compatible with gasoline, diesel, and E85 fuel blends
• Operating temperature range: -20°F to 221°F (-30°C to 105°C)
• Suitable for both freshwater and saltwater installations when properly secured

What pressure ratings and safety standards does it meet?

The hose is rated for a maximum working pressure of 300 PSI and a burst pressure of 900 PSI, providing a margin of strength for typical marine fuel systems. It conforms to SAE J1527 Type A1-15 and ISO 7840 Type A1 requirements and addresses low permeation rules from W/EPA and CARB for reduced evaporative emissions.

• Working pressure: 300 PSI; burst pressure: 900 PSI
• Complies with SAE J1527 Type A1-15 and ISO 7840 Type A1
• Meets W/EPA and CARB very low permeation requirements

How should I install and inspect this fuel hose on my boat?

Use marine-grade clamps and fittings compatible with 1/4" ID hose; avoid sharp bends and secure the hose away from heat sources and moving parts. Regularly inspect for chafing, cracking, or hardening and replace if any damage or excessive wear is visible.

• Install with appropriate marine clamps and compatible fittings
• Avoid tight bends and external heat sources; allow slack for vibration
• Inspect periodically and replace at first sign of damage or stiffening

Who is this for: Boat owners, marine mechanics, and builders looking for a compliant, low-permeation 1/4" fuel hose for small-to-medium marine engines will find this EVIL ENERGY Type A1-15 hose suitable. It is aimed at those who require regulatory compliance (SAE J1527, ISO 7840) and a durable construction that tolerates fuel blends, outdoor exposure, and the mechanical demands of marine installations.