EWK 3.5 x 4.5 mm Slim Hose 1m for 6.5/10.5/15L Extractors — Nylon, Iron‑Reinforced

EWK's 3.5 x 4.5 mm slim hose is a 1‑meter nylon extension tube designed to reach tight dipstick tubes and fully extract oil and other non‑corrosive fluids from 6.5L, 10.5L and 15L EWK extractors.

If your vehicle has a narrow dipstick tube or recessed reservoir, the standard extractor tube can be too thick to reach the bottom. This specially made slim hose threads onto EWK oil extractors (SKU: EB0103, EB0244, EB0280, EB0296, EB0297) via the included blue adapter to extend reach and improve recovery. Constructed from durable nylon with an internal iron stiffener, the tube withstands typical oil temperatures and stays rigid enough to guide the tip into deep or angled openings.

How does this slim hose get more oil out of hard‑to‑reach reservoirs?

The narrow 3.5 x 4.5 mm profile slips into small dipstick tubes that larger extractor hoses cannot enter. One meter of length reaches the reservoir bottom so the pump can evacuate nearly all fluid rather than leaving a deep puddle behind.

• 1‑meter length for deep sump access
• 3.5 x 4.5 mm slim diameter fits most narrow dipstick tubes
• Internal iron wire keeps the hose aligned when inserted
• Blue adapter for secure connection to EWK main tube

Will the hose handle oil temperature and regular shop use?

Yes — the hose is molded from prime nylon selected for oil resistance and dimensional stability at typical extraction temperatures. It resists cracking and deforming under ordinary automotive service conditions, and the iron wire reinforcement prevents kinking during repeated use.

• Prime nylon construction resists oil and heat
• Reinforced with auxiliary iron wire for stiffness
• Designed for repeated insertions without splitting

Which fluids and extractor models are compatible with this extension?

Designed primarily for use with EWK pneumatic/manual and manual oil changers, this slim hose works with 6.5L, 10.5L and 15L models listed above. It also handles a range of non‑corrosive liquids beyond engine oil, making it versatile for general shop tasks.

• Fits EWK models: EB0103, EB0244, EB0280, EB0296, EB0297
• Suitable for oil, power steering fluid, water, coolant, and similar non‑corrosive liquids
• Connects to extractor main tube using the blue adapter included

How easy is it to install and maintain the extension tube?

Installation is straightforward: attach the slim hose to your extractor’s main tube using the blue adapter and ensure a snug fit before pumping. Maintenance is minimal — flush the tube after use, inspect the wire reinforcement and replace if damaged to maintain extraction efficiency.

• Push‑fit connection with blue adapter for secure sealing
• Flush with compatible solvent or clean oil after each use
• Inspect for abrasions or bent wire before reuse

Who this is for: technicians and DIYers who frequently service vehicles with narrow or recessed dipstick tubes, fleet maintenance operators looking to reduce residual oil waste, and anyone using EWK 6.5L, 10.5L or 15L extractors who wants a reliable, long‑reach accessory. Backed by EWK's 12+6 month warranty, the slim hose is a practical upgrade for tighter engine bays and improved extraction results without modifying your extractor or the vehicle.