EXERAUO LED Boat Trailer Lights Kit — Submersible DOT-Approved Tail Lights, IP68 Waterproof with Halo Glow

EXERAUO boat trailer lights LED kit is a submersible, DOT-approved tail light set with halo glow design, internal chrome reflectors, drainage ports, and a complete wiring layout for reliable marine towing visibility.

These LED tail lights are engineered for trailers that frequently encounter water, offering a sealed, IP68-rated housing and a dedicated drain hole to protect circuitry when submerged. The kit combines a distinctive halo glow with solid stop/running illumination and an internal chrome reflector to increase visible output. Built to fit 12V systems and commonly used on boats, campers, utility trailers, and small commercial vehicles, the set balances durability and safety with straightforward wiring.

How do these lights perform when submerged or exposed to splash?

EXERAUO lights are designed to remain functional after immersion thanks to an IP68-rated seal and a purpose-built drain hole that helps remove trapped water from the housing. The internal construction isolates diodes and the circuit board from long-term moisture damage when installed correctly with the drain port angled downward.

• IP68 waterproof rating for temporary submersion.
• Drain hole prevents pooling inside the lamp body.
• Robust gasket and housing keep out dust and spray.

What wiring and light functions are included in the kit?

The kit provides clearly color-coded leads for left and right lamps so you can hook up running lights, brake lights, and ground quickly. Each side uses a white ground wire, a high-brightness brake wire, and a low-brightness running light wire; wiring follows common trailer color conventions for easier installation.

• Left: white = ground, white+yellow = brake (high), white+brown = running (low).
• Right: white = ground, white+green = brake (high), white+brown = running (low).
• Designed for standard 12V trailer electrical systems.

How bright and visible are these tail lights compared with typical trailer lights?

The EXERAUO lamps combine a halo glow pattern with a concentrated solid light zone and an internal chrome reflector to boost perceived brightness and broaden the viewing angle. This layered design increases side and rear visibility, making the trailer easier to see at night and in wet conditions without relying solely on raw lumen numbers.

• Distinct halo glow for wider peripheral visibility.
• Internal chrome reflector amplifies light output.
• DOT approval indicates compliance with applicable visibility standards.

What are the physical dimensions and compatibility of the lights?

Each lamp measures approximately 8.3 inches long, 2.6 inches wide, and 3 inches high, which fits a wide range of boat and utility trailers. The compact profile suits installations on trailers both under and over 80 inches wide, and the kit is applicable to many towing vehicles including trucks, campers, and vans.

• Dimensions: 8.3" L × 2.6" W × 3" H per lamp.
• Suitable for 12V systems and common trailer applications.
• Works with boats, campers, dump trailers, tractors, and caravans.

Who is this for: This EXERAUO LED submersible boat trailer light kit is intended for boat owners, commercial haulers, and recreational trailer users who need dependable, waterproof tail lights that tolerate immersion and improve on-road visibility. Choose this set if you tow across launching ramps, drive in rainy climates, or require DOT-approved illumination with straightforward wiring and a compact footprint.