FAITIO 12V Electric Fuel Transfer Pump 13 GPM — High-Flow 200W Copper Motor, 2" Drum Fit Kit

FAITIO's 12V electric fuel transfer pump is a high-flow, self-priming 13 GPM kit designed to move diesel, kerosene, and similar fluids quickly and cleanly from 2" drum bungs into tanks and equipment.

This pump combines a rugged 200W copper motor rated at 4200 RPM with heavy-duty windings, a built-in mesh inlet filter, and a complete set of hoses and fittings so you can begin transferring fuel right away. It’s engineered to replace slow, manual siphoning and to eliminate the back-and-forth of hauling heavy barrels. The result is faster refueling, reduced spills, and dependable operation for farm, workshop, or jobsite use.

How fast will this pump move fuel?

The FAITIO transfer pump delivers up to 13 gallons per minute, which means an average 55-gallon drum can be emptied in roughly eight minutes under typical conditions. Peak flow depends on elevation, hose length, and fluid viscosity, but the upgraded 200W motor and 4200 RPM rating sustain steady output with fewer interruptions than lower-power units.

• 13 GPM nominal flow rate — high-capacity for quick transfers
• Moves a 55-gallon drum in about 8 minutes under normal conditions
• 200W copper motor at 4200 RPM for consistent, continuous pumping
• Built for heavier fluids like diesel and kerosene

What connections and accessories are included?

The kit arrives as a ready-to-use assembly with both inlet and outlet hoses, an adjustable manual nozzle, and mounting hardware so you won’t need additional parts. The inlet hose fits typical 2" drum bungs and a mesh filter at the intake helps prevent debris from entering the pump, reducing clogs and wear.

• Fits 2" drum bungs for direct barrel installation
• Includes 4.9 ft inlet hose and 6.6 ft outlet hose (11.5 ft total)
• Adjustable manual nozzle for controlled stop/start and precise filling
• Mounting hardware and built-in mesh filter for clean reliable operation

Can I use this for tractors, generators, and other equipment?

Yes — the pump is suitable for drum-to-tank refueling of vehicles, generators, farm equipment, and other machinery that accept diesel, kerosene, or similar non-corrosive petroleum-based fluids. The self-priming design means you don’t have to pre-fill the lines, and the 12V power connection makes it simple to run from a vehicle battery or dedicated 12V source on-site.

• Works with diesel, kerosene, transformer oil, and comparable fluids
• Self-priming — no manual siphon required
• 12V power for battery or vehicle-based operation
• Strong lift and length to reach elevated tanks or fixed refueling points

How durable and serviceable is the pump?

FAITIO designed the pump for frequent use with a professional-grade build: a copper-wound motor and heavy-duty internal components resist overheating and premature failure. Regular cleaning of the mesh filter and following recommended fuel-handling precautions will prolong service life and maintain peak performance.

• Upgraded 200W copper motor and heavy windings for longevity
• Built-in mesh filter reduces debris-related wear and clogs
• Robust hoses and manual nozzle rated for repeated industrial use
• Mounting hardware included for secure, stable installation

Who is this for? The FAITIO Electric Fuel Transfer Pump is aimed at serious DIYers, farmers, fleet operators, and tradespeople who need a fast, dependable way to transfer fuel without lifting heavy barrels or using messy siphons. If you regularly refill tractors, generators, or multiple vehicles and want an out-of-the-box 12V solution with pro-grade components and a high flow rate, this pump is built for that workload.