ForoGore 3/8" Heavy-Duty D-Ring Tie-Down Anchors — 6-Pack, 2,000 lb WLL, Black Corrosion-Resistant

ForoGore 3/8" heavy-duty D rings are solid-steel, surface-mounted tie-down anchors sold in a 6-piece set, each rated to hold 2,000 lb with a 6,000 lb break strength and coated to resist corrosion.

Built for trailers, trucks, RVs and workshop mounting, these ForoGore D rings create secure anchor points for straps, ropes, and cables without welding. The black corrosion-resistant finish extends service life while the bolt-through base installs quickly with common fasteners. This product description explains how they perform, how to fit them, and where they work best so you can decide if they suit your cargo control needs.

How strong are these D rings and what do those numbers mean?

Each D ring is fabricated from high-strength solid steel and tested to support 2,000 lb in normal use, with a maximum break strength of 6,000 lb. Those figures describe working load capacity and ultimate failure point under static testing; always factor in dynamic loads and safety margins when securing cargo.

• Working capacity: 2,000 lb per D ring
• Break (ultimate) strength: 6,000 lb
• Solid-steel construction for consistent load performance
• Black corrosion coating to preserve structural integrity

How do I install the ForoGore D rings on my trailer or vehicle?

Installation is surface-mounted and straightforward: no welding required. Mark mounting points, drill pilot holes if needed, then secure the base plate using bolts or carriage screws sized to your substrate.

• Mounting: surface-mount base plate with bolting hole
• Tools: drill or screwdriver, appropriate bolts or screws (not included)
• Surfaces: wood, trailer deck, metal subframe, or garage walls
• Tip: use lock washers or threadlocker for vibration-prone applications

Will these D rings resist rust and work outdoors?

The anchors have a black protective coating that reduces corrosion compared with bare steel, making them suitable for outdoor and marine-adjacent use. For long-term exposure in saltwater environments, periodic inspection is recommended and additional corrosion protection may be used.

• Finish: black corrosion-resistant coating
• Maintenance: inspect fasteners and finish periodically
• Marine use: acceptable for many applications; consider extra protection near saltwater
• Storage: keep unused anchors dry to maximize lifespan

What kinds of cargo and vehicles are these D rings best for?

These anchors are versatile for many load-control tasks: they handle straps for motorcycles, ATVs, kayaks, furniture, and general freight in trucks, trailers, vans and workshops. Use multiple anchors and proper load-distribution techniques for heavier or awkward loads.

• Common uses: trailers, pickup beds, RVs, vans, garages
• Suitable for: motorcycles, ATVs, kayaks, appliances, cargo pallets
• Quantity: pack of 6 gives flexibility to add multiple tie points
• Mounting patterns: place anchors to balance tension and avoid load shift

Who is this for? ForoGore 3/8" D rings are designed for vehicle owners, professional haulers, and DIYers who need reliable, surface-mounted anchor points without welding. They suit anyone fitting out a trailer, reinforcing tie-down options in a pickup bed, outfitting an RV or van, or adding secure anchor points in a garage or workshop. Choose these if you want solid-steel anchors with clear load ratings, easy bolt-on installation, and a protective finish for everyday towing and cargo restraint tasks.