Fulchron 20oz Disposable Paint Cups with 125-Micron Filter Lids — 50 Liners, 2 Reusable Outer Cups, Measurement Scales

This kit bundles everything needed to measure, mix, filter and spray small batches of automotive or industrial coatings without washing reusable cups between jobs. The 20-ounce (approx. 600 ml) liners include clear measurement markings and mixing scales for consistent paint-to-hardener ratios, while the included 125-micron filter lids trap contaminants before they reach the spray gun. The system ships with two hard reusable outer cups, universal 1.0-adapter fittings, sealing plugs, PTFE tape and a stir stick so you can set up and run multiple jobs quickly.

How does this kit speed up prep and cleanup?

The disposable liners remove the need to flush or scrub metal cups after every coat, reducing solvent use and drying time between color changes. Swapping liners and lids takes only seconds, so technicians can move from one job to the next with minimal downtime.

• 50 disposable liners and 50 filter lids for many consecutive jobs
• Sealing plugs for short-term storage without contamination
• Reusable outer cups keep adapters and threads clean
• Less solvent and labor for each color change

Will measurements and mixing be accurate for coatings work?

Yes — each liner has molded measurement marks and mixing scales to track paint, reducer and hardener volumes precisely. That helps you reproduce ratios reliably across jobs whether working with basecoat, primer, sealer or clearcoat.

• Visible graduated markings for ounces and milliliters
• Mixing scales for typical automotive paint ratios
• Consistent volume control reduces material waste
• PTFE tape included for secure adapter sealing

What contamination control does the system provide?

The included 125-micron filter lids capture dust, dried paint flakes and other particulates before they reach the spray gun, improving finish consistency. The sealed liners also limit paint exposure to air, which helps preserve mixed material during brief storage.

• 125 µm filter lids reduce clogs and fisheye risks
• Sealed liners help minimize oxidation and waste
• Disposable system reduces cross-contamination between colors
• Filter lids double as secure dispensing closures during spraying

Which spray guns will this fit and what should I check?

This kit is built for spray guns that accept original 1.0 adapter threads — it is not compatible with 2.0-style adapters. The pack contains two common 1.0 fittings (16mm × 1.5mm female and 3/8" male) so you can match many classic HVLP guns, but we recommend confirming your gun’s adapter size before ordering.

• Includes two 1.0 adapters: 16mm×1.5mm female and 3/8" male
• Not compatible with 2.0 adapter systems
• PTFE tape helps ensure a tight thread seal
• Adapters support most standard HVLP spray guns with 1.0 fittings

Who is this for: Professionals and serious DIYers in automotive refinishing, collision repair, custom painting, furniture finishing and light industrial coating work who need reliable single-use mixing cups to save time and reduce solvent consumption. If you swap colors often, work in a fast-paced shop, or want to cut cleaning labor while maintaining accurate mix ratios, this Fulchron disposable cup system is designed for your workflow — just verify your spray gun uses original 1.0 adapters before purchase.