Fumoto FN-Series Engine Oil Drain Valve F108N — M16 x 1.5 with Long Nipple & LC-10 Clip, Reusable One-Hand Operation

Fumoto F108N is a reusable FN-series engine oil drain valve with a long nipple and LC-10 lever clip that lets you drain oil cleanly and quickly without removing the drain plug.

The F108N replaces a standard M16 x 1.5 drain plug with a threaded valve engineered for one-handed operation and secure hose attachment. It features a longer nipple for easier hose connection, a spring-loaded lever with LC-10 clip to prevent accidental opening, and durable materials designed for repeated use. This description explains how it works, what to check before buying, and practical installation and use tips so you can decide if it fits your vehicle and routine.

How does the Fumoto F108N make oil changes neater and faster?

The valve allows you to open and close the oil drain with a quick twist and lever motion, eliminating the need to remove the factory drain bolt and wrestle with oil runoff. Its long nipple accepts standard drain hoses so oil flows directly into a container with minimal splashing. The LC-10 lever clip locks the lever in the closed position for safe driving between changes.

• One-touch operation for faster drain starts and stops
• Long nipple lets you attach drain hose securely
• LC-10 clip prevents accidental opening while driving
• Reduces spilled oil and cleanup time

Will the F108N fit my vehicle and what installation basics should I know?

This model fits M16 x 1.5 drain openings common on many cars and light trucks; confirm thread size before purchase. Some vehicles require an adapter or extension for clearance or to match the factory plug length. Always tighten at the valve body, not the nipple, and follow Fumoto torque guidance to avoid overtightening.

• Thread size: M16 x 1.5 — verify your drain plug spec
• Adapters may be necessary for certain oil pans or offsets
• Tighten body only; under-torque when using adapters
• Not recommended for very low-clearance vehicles

What safety features and maintenance steps keep the valve reliable?

The spring-loaded design returns the valve to closed position and the LC-10 clip locks it for transport, reducing leak risk. Periodic checks for debris on the seat and light lubrication of the lever keep operation smooth. If removal or adapter use is needed, follow Fumoto’s instructions and contact Fumoto support for troubleshooting.

• LC-10 clip secures lever during driving
• Inspect seal and threads at every oil change
• Clean and lightly lubricate moving parts if stiff
• Contact Fumoto for installation or service questions

How does the F108N compare with a traditional drain plug for longevity and cost?

While the initial cost is higher than a single-use drain plug, the Fumoto valve is reusable and reduces time and mess over many oil changes. It also prevents stripped or rounded drain plug threads and the common problems associated with frozen or seized factory plugs. Proper installation and periodic checks help it deliver long-term value.

• Reusable valve reduces repeated plug purchases
• Protects oil pan threads from damage
• Reduces labor time for routine oil changes
• Requires correct fit and occasional maintenance

Who is this for: The Fumoto F108N is ideal for DIY vehicle owners, fleet operators, and professional mechanics who want faster, cleaner oil changes and protection for drain threads. Choose this valve if your vehicle uses an M16 x 1.5 drain, you can accommodate the standard-length nipple, and you prefer the convenience of hose-directed drainage with a locking clip for safety.