Ganluuree Exhaust Hanger Kit 16-Piece — 3/8" (10mm) Zinc-Coated Rods, 90° 7.6" & Straight 10" with Rubber Insulators

Ganluuree’s 16-piece exhaust hanger kit supplies zinc-coated 3/8" (10mm) mild-steel rods in both 90° (7.6") and straight (10") forms plus rubber insulators to replace or customize muffler and pipe mounts.

This kit is built for DIYers and professional mechanics who need a durable replacement set to secure exhaust systems, limit vibration, and prevent damage to the vehicle body. The rods are heavy-gauge mild steel with a zinc finish to resist corrosion, and the assortment of rod shapes and insulator mounts lets you weld, cut, and fit hangers to a wide range of passenger cars, trucks and light SUVs.

What exactly is included in the Ganluuree exhaust hanger kit?

The set combines multiple rod types and mounting insulators so you can match existing hangers or fabricate new ones. It covers most common repair and custom-fit needs for muffler hangers and exhaust pipe supports.

• 3/8" (10mm) mild-steel rods with zinc coating for corrosion resistance.
• 90° bent rods, nominally 7.6" long, for right-angle hanger points.
• Straight rods, nominally 10" long, for inline or adjustable mounts.
• Rubber insulator mounts (two-hole and four-hole styles) to isolate vibration.

How will these rods improve the exhaust mounting on my vehicle?

Replacing worn or broken hangers with properly sized rods restores correct hanger height and reduces excessive movement that can damage mufflers, pipes and body panels. The zinc finish slows rust so mounts last longer in road conditions.

• Stiffer mild-steel rods prevent sagging under exhaust weight.
• Rubber insulators dampen vibration and reduce noise transmission.
• Zinc coating helps resist salt and moisture corrosion.
• Varied rod shapes simplify matching factory hangers or custom layouts.

Can I weld, cut, or modify these hangers for custom exhaust work?

Yes — the rods are designed for straightforward DIY modification: cut to length, bend if needed, or weld into place on aftermarket or factory brackets. Use standard welding practices and confirm the zinc coating is removed from the weld area to ensure a sound joint.

• Weld-friendly mild steel base material for secure attachment.
• Trim or bend straight rods to fit non-standard configurations.
• Attach insulators at mount points to protect sheet metal from wear.
• Confirm sizes (3/8"/10mm and lengths) before cutting or welding.

How do I choose the right rod and insulator for my muffler hanger point?

Identify whether the factory hanger is angled or straight, then match the rod shape and length. Use two-hole insulators for simpler single-point mounts and four-hole insulators for added stability where vibration and movement are greater.

• Measure existing hanger diameter and length to confirm 3/8" (10mm) compatibility.
• Use 90° rods where the mount exits at an angle from the chassis.
• Use straight rods for inline hangers or adjustable offsets.
• Select rubber insulators that align with bolt-hole layout for secure fitment.

Who this is for: This Ganluuree kit suits home mechanics, mobile exhaust technicians, and aftermarket installers repairing or upgrading exhaust hangers on cars, light trucks, and SUVs. It’s especially helpful if you need a mix of bent and straight rods plus insulators to duplicate factory mounts or create stronger custom supports. Always verify measurements and follow safe welding and mounting procedures when installing.