Ganluuree Exhaust Hanger Rod Kit 10pc — 10" & 7.6" Zinc-Coated Mild Steel Rods with EPDM Rubber Insulators, Adjustable 90° Bend

Ganluuree's 10-piece exhaust hanger rod kit is a complete, adjustable mounting solution that replaces worn muffler hangers with zinc-coated steel rods and EPDM rubber insulators for quieter, more secure exhaust support.

This all-in-one set provides a mix of straight and 90° bent hanger rods plus two types of rubber bushings so you can repair or customize exhaust attachments on a wide range of cars and light trucks. Built for durability, the rods are mild steel with a zinc coating to resist corrosion, while the insulators are made from heat- and wear-resistant EPDM rubber. The kit is sized to be trimmed or welded in place, letting you adapt the hangers to factory locations or custom exhaust work.

What parts are included and how do they fit together?

The kit contains two 10" straight rods (0.33" / 8.4 mm), four 7.6" rods with 90° bends (3/8" / 10 mm), and four rubber insulator mounts — two with two holes and two with four holes. Rods slide through or weld to brackets, while the rubber insulators isolate vibration and secure the pipe. Installers can cut rod length or weld tabs to match vehicle mounting points.

• 2 × 10" straight zinc-coated mild steel rods (8.4 mm)
• 4 × 7.6" 90° zinc-coated rods (10 mm)
• 2 × 2-hole EPDM rubber insulators
• 2 × 4-hole EPDM rubber insulators

How does this kit reduce vibration and noise?

The supplied EPDM rubber bushings act as vibration dampers between metal components, preventing rigid metal-on-metal contact that transmits sound and shock into the vehicle body. By isolating the muffler and pipes, the hangers reduce rattles and movement during acceleration, braking, and over bumps. Using the correct insulator orientation and rod length helps maintain a stable, quieter exhaust position.

• EPDM rubber resists heat and flexes to dampen vibration
• Zinc coating slows corrosion that could create loose connections
• Multiple hole patterns let you choose the most secure mounting geometry

Can I cut or weld these hangers to fit my vehicle?

Yes — the mild-steel rods are designed for aftermarket modification: they can be trimmed to length or welded to tabs for permanent mounting. If you plan to weld, use appropriate safety and anti-corrosion practices, then slide the rubber insulator on after cooling. For non-weld repairs, bend or use existing brackets and secure the rod with the rubber mount for a reversible fix.

• Rods are weldable mild steel with zinc plating for longevity
• Trim rods with a cutoff wheel to match factory locations
• Install insulators last to protect rubber from welding heat

What maintenance or precautions should I take?

Inspect hangers periodically for cracked or hardened rubber and for rust at welded joints. Replace any fatigued insulator or corroded rod to avoid sudden exhaust sag or detachment. When welding, protect the rubber bushings from heat and reapply corrosion protection to exposed metal after assembly.

• Check rubber insulators for wear every oil change interval
• Recoat cut or welded metal with high-temperature paint or primer
• Keep replacement rods and bushings accessible for quick field repairs

Who is this for: Mechanics, DIY enthusiasts and professional exhaust shops who need a versatile, durable repair kit for muffler and pipe support will benefit from the Ganluuree 10PCS Exhaust Hanger Rod Set. It suits classic exhaust repairs, custom fabrication, emergency roadside fixes, and routine maintenance on cars and light trucks where a long-lasting, adjustable hanger solution is required.