Getfarway 6.1" Touch Screen Digitizer for Toyota Camry 2013-2017 — 12‑Pin, Scratch‑Resistant Glass

Getfarway's 6.1" replacement touch screen digitizer restores full touch and navigation control for Toyota Camry stereo units from 2013–2017 that match the listed faceplate IDs.

If your Camry's factory radio shows a cracked, unresponsive, or scratched display, this Getfarway 6.1" touch panel offers a direct-fit replacement designed for Toyota part numbers such as 86140-06190 and related variants. The glass-and-touch assembly measures approximately 150 x 84 mm, uses a 12-pin connector, and is compatible only with specific faceplate IDs—confirm the ID printed on the lower-right bezel of your radio before ordering. Getfarway includes a basic tool kit to simplify removal and installation, and the replacement screen is engineered for clear visibility and scratch resistance.

Which Toyota Camry radios will this Getfarway screen work with?

This digitizer is intended for Camry models from 2013 through 2017 that have one of the supported faceplate IDs. It replaces various OEM part numbers but will not function with radios that use a different faceplate ID or connector type.

• Compatible years: Toyota Camry 2013, 2014, 2015, 2016, 2017.
• Supported faceplate IDs: 100201, 100369, 100366, 100614, 100621, 100626.
• Replaces part numbers: 86140-06190 and listed equivalents.
• Connector: 12-pin interface—verify your unit's connector matches.

How easy is it to install the replacement glass and do tools come with it?

Installation is straightforward for anyone comfortable with basic dashboard disassembly; Getfarway ships a tool set to help you remove the trim and original screen without damaging the dash. The new digitizer mounts in the original housing and connects via the factory 12-pin plug—no soldering required—though careful work and patience are recommended.

• Included: disassembly tool set to pry bezels and unsnap clips safely.
• Mounting: designed to fit the existing radio frame and screw points.
• Connection: plug-and-play 12-pin ribbon connector matches factory harness.
• Tip: disconnect battery before starting to avoid short circuits.

What are the display and durability features of this Getfarway panel?

The replacement panel provides a clear, high-contrast viewing area and a smooth capacitive touch surface built to withstand daily use. The glass resists scratches and normal wear, keeping controls legible and the screen responsive over time.

• Size: 6.1 inches (approx. 150 × 84 mm) for an OEM-like fit.
• Touch: capacitive touch responsiveness for taps and swipes.
• Finish: scratch-resistant glass for longevity and clarity.
• Compatibility note: functions only with radios matching listed IDs.

Will replacing the screen affect other radio features like navigation or audio?

When installed correctly on a compatible unit, the Getfarway digitizer restores touch input without altering the radio’s software features such as navigation, Bluetooth, or audio controls. This is a hardware replacement for the display only; firmware and system functions remain governed by the original head unit.

• Restores touch control for existing navigation and menus.
• No software changes or reprogramming required for compatible units.
• If the head unit has other faults, those will not be fixed by the screen alone.
• Always confirm compatibility to avoid non-functional installations.

Who this is for: this Getfarway digitizer is aimed at Toyota Camry owners (2013–2017) who have a cracked, unresponsive, or scratched factory screen and want a cost-effective, OEM-style replacement. It's suited to DIYers and professional installers who can confirm the radio's faceplate ID and handle dashboard disassembly. If you need a full head unit swap or your faceplate ID doesn't match, consider alternative repair paths.