Glass Polish Glass Scratch Removal Kit for Drill — 3in Backing Pad, Abrasives & Polishing Compound

Glass Polish 3" Glass Scratch Removal Kit is a drill‑powered DIY system that safely reduces scratches, scuffs and surface damage on most glass types.

This compact repair kit supplies the abrasives, felt pads, polishing compound and a backing pad designed to attach to a standard electric drill so you can restore small to medium damaged areas yourself. The components are sized to work on 75mm (3-inch) spots, letting you quickly treat chips, graffiti marks, light acid etching and everyday surface scuffs without replacing the entire pane.

How does the kit work with my drill?

The backing pad connects to any common drill chuck, turning the drill into a controlled polishing tool. Use progressively finer xNet abrasive discs, then a felt pad with polishing compound to blend and restore the finish.

• 75mm (3") backing pad with drill attachment for secure mounting
• Interchangeable xNet abrasive discs (coarse-to-fine workflow)
• Felt polishing pads and GP‑PRO compound for final shine
• Supplied step‑by‑step guide to set speed and pressure

What kinds of glass damage can this repair?

The kit targets surface problems rather than structural breaks. It’s intended for scratches, light scuffs, some graffiti abrasion, minor acid etching and other surface degradation that sits on or just below the finish.

• Removes or reduces shallow scratches and scuffs
• Improves appearance after graffiti or surface abrasion
• Helps minimize light acid‑etching marks on treated surfaces
• Not for deep cracks, shattered glass, or structural damage

Which glass types is the kit safe for?

This system is formulated for a wide range of glass commonly used in homes, vehicles and commercial settings. Always test a small inconspicuous area first and follow the instructions to avoid over‑polishing sensitive finishes.

• Suitable for mirrors, window panes, auto glass, laminated and tempered glass
• Works on small to medium damaged areas with 3" pad coverage
• Use lower speeds and lighter pressure on coated or tinted glass
• Includes cleaning cloth and water spray to control heat buildup

What comes in the box and how long does a repair take?

The kit bundles all essentials to complete a single or multiple spot repairs depending on damage extent. Typical single‑spot repair time ranges from a few minutes to under an hour based on scratch depth and required steps.

• 3" (75mm) backing pad with drill attachment
• Two 3" felt polishing pads and four 3" xNet abrasive discs (blue and green)
• 50ml GP‑PRO polishing compound and 100ml water spray bottle
• Microfiber cleaning cloth and illustrated step‑by‑step instructions

Who is this for: DIYers, property managers, auto detailers and small refurbishment teams who need an affordable, portable way to restore glass appearance without replacing panes. If you need to treat isolated surface damage quickly and cost‑effectively and you have a standard electric drill, this kit provides the abrasives, pads and polish to get the job done with clear guidance and technical support from the Glass Polish team.