Gold Label Detailing Cerium Oxide Glass & Lens Polish 8oz with 3" Felt Bob — Optical Grade Scratch Removal

Optical grade cerium oxide 8oz powder from Gold Label Detailing is a DIY glass and lens polishing kit that removes light scratches, scuffs, and water spots when used with the included 3" felt bob and a drill.

This concentrated, zinc-free cerium oxide formula mixes with water to form a polishing slurry designed for windshields, household windows, camera lenses, scopes, and binocular optics. The kit bundles a high-purity powder and a 3-inch felt polishing bob so you can attach it to any compatible high-speed drill and restore clarity without costly replacements.

How does this product restore scratched glass and lenses?

The cerium oxide powder works as a fine abrasive that, when mixed into a slurry and applied with the felt bob, smooths microscopic ridges produced by scratches. It polishes the surface to reduce light scattering and improve visual clarity, not by filling but by gently abrading the damaged area.

• Optical-grade particles engineered for fine polishing.
• Mix with tap water to a paste-like slurry for even application.
• Use the 3" felt bob on a drill for controlled, consistent abrasion.
• Suitable for light to moderate surface imperfections, not deep gouges.

Will it work on my windshield, camera lens, or binocular glass?

Yes—this formulation is formulated to be safe on many types of glass and coated optics when used correctly. However, exercise caution on multi-coated camera or specialty optics: test a small inconspicuous area first and avoid aggressive polishing on delicate coatings.

• Compatible with automotive glass, home windows, and many optical lenses.
• Not recommended for heavily pitted or cracked glass that needs replacement.
• Always test coatings and follow gentle technique for coated optics.
• Works best on surface scratches, scuffs, and hard-water marks.

How do I prepare and apply the cerium oxide for best results?

Mix a small amount of powder with water to form a creamy slurry, apply to the felt bob, and run the drill at moderate speed while keeping steady pressure and movement. Regularly add slurry as needed and wipe clean to check progress.

• Combine powder and water to a paste before use; consistency should be tacky, not runny.
• Attach the 3" felt bob to a drill and apply with even, overlapping passes.
• Work in short intervals, rinse and inspect often to avoid over-polishing.
• Finish with a clean microfiber wipe to reveal improved clarity.

What safety and care tips should I follow?

Use eye protection and avoid inhaling powder dust during mixing. Keep the slurry off painted surfaces and follow gentle pressure for sensitive lenses; discontinue if you see coating damage or excessive heat.

• Wear safety glasses and a dust mask when mixing the powder.
• Protect surrounding trim and paint; mask areas if needed.
• Allow surfaces to cool between polishing passes to prevent heat buildup.
• Store the powder in a dry, sealed container to maintain potency.

Who is this for: Gold Label Detailing's Optical Grade Cerium Oxide 8oz kit is designed for DIYers, photographers, hunters, and vehicle owners who want to restore clarity to glass and many optical lenses without professional costs. It suits anyone comfortable using a drill-based polishing pad and following step-by-step precautions; for deep cracks or structural damage, consult a replacement or professional repair service instead.