GTMOTO D3S HID Xenon Bulbs for 2013–2014 Ford F-150 — 6000K Daylight White, 35W Plug-and-Play

GTMOTO D3S HID Xenon bulbs are a direct-fit high-intensity replacement that upgrades compatible 2013–2014 Ford F‑150 projector low beams to a crisp 6000K daylight output.

If your 2013 or 2014 Ford F‑150 came with projector-style HID headlights, these GTMOTO D3S bulbs give a brighter, whiter beam than the stock units. They are engineered as a plug-and-play D3S C1 replacement for vehicles originally equipped with xenon projectors, not for base-model reflector halogen headlamps. Each set includes two 35W xenon gas-discharge capsules built from anti-UV quartz glass for stable light and extended life.

Will these bulbs fit my 2013–2014 Ford F‑150?

They fit F‑150s that use D3S xenon projector low beams in higher trim packages (Platinum, Lariat, King Ranch, SVT, FX4, etc.). They will not fit trucks with H13/9008 halogen reflector headlamps commonly found on base trims.

• Compatible: projector-equipped F‑150s from 2013–2014 (higher trims).
• Not compatible: base-model reflector halogen (H13/9008) headlamps.
• Check your original bulb type: look for D3S marking or consult owner manual.

How much brighter and whiter are these compared to stock bulbs?

These GTMOTO D3S bulbs produce roughly 1.5× the apparent brightness of older factory xenon units and run at a 6000K color temperature for a daylight-white appearance. That provides clearer contrast on the road at night without changing beam pattern when installed in proper projectors.

• Output: about 1.5× perceived brightness vs. older D3S units.
• Color: 6000K daylight white for crisp visibility.
• Power: standard 35W HID output, compatible with OEM ballasts.

Is installation difficult and will I need extra parts?

Installation is designed to be quick and straightforward in projector-style housings—typically a 10‑minute swap per side without cutting or modifications. These are AC D3S xenon capsules intended to work with factory HID ballasts; no additional conversion kit is normally required.

• Installation time: around 10 minutes per side in projector housings.
• Electrical: fits standard 42V AC D3S xenon ballast systems.
• No modifications: plug-and-play for compatible cars; do not use in halogen sockets.

How durable are the GTMOTO D3S xenon bulbs?

Constructed from anti-UV quartz glass and engineered for gas-discharge performance, these bulbs offer extended service life compared with cheaper alternatives. Expect thousands of hours of service under normal conditions, with fast strike time and stable light output as they warm to full intensity.

• Materials: anti-UV quartz glass resists yellowing and heat damage.
• Life expectancy: rated for thousands of hours of typical use.
• Performance: quick start-up to full brightness and consistent beam quality.

Who is this for: These GTMOTO D3S HID bulbs are intended for Ford F‑150 owners (2013–2014) whose trucks came equipped with OEM xenon projector low beams and who want a whiter, brighter 6000K upgrade. They are ideal for higher-trim F‑150s—Platinum, Lariat, King Ranch, FX4, STX, XL, XLT and similar—while owners of base trim reflector halogen trucks should not purchase these bulbs. Always verify your headlamp uses D3S xenon capsules before ordering to ensure compatibility.