GXARTS LS throttle cable 36-inch braided trim-to-fit accelerator for Chevrolet LS1/LS swap, abrasion-resistant

This 36-inch throttle cable from GXARTS is designed for compatibility with Chevrolet LS engines—covering 1997–2004 5.7L and 1999–2007 4.8L, 5.3L, and 6.0L applications—and for many aftermarket carburetor and pedal assemblies used in LS swap projects. The cable uses quality materials and a braided outer sleeve to resist abrasion while allowing you to shorten the run to the precise length needed for neat routing in engine bays, hot rods, or custom chassis.

Will this cable fit my LS swap or stock LS1 throttle assembly?

GXARTS engineered the 36" cable to be broadly compatible with stock Chevrolet LS1 throttle components and most aftermarket throttle bodies, pedal boxes, and carburetor linkages. Confirm end fittings and routing path before trimming to ensure proper engagement and smooth throttle travel.

• Compatible with Chevrolet LS1 engines (1997–2004 5.7L and 1999–2007 4.8L/5.3L/6.0L)
• Works with many aftermarket carburetors, throttle bodies, and pedal boxes
• Trim-to-fit 36" overall length for flexible installation
• Check connector type and throttle arm geometry before final cut

How do I install and shorten the GXARTS throttle cable correctly?

Installation starts by routing the cable along the planned path and marking the necessary length with the throttle closed. Use the cable’s end fittings to measure and cut the inner wire and outer sleeve accurately, then secure fittings and test free play so the throttle returns smoothly without binding.

• Route cable away from heat sources and sharp edges
• Measure with throttle closed and at full throttle to set correct length
• Cut outer sleeve and inner wire cleanly, then crimp or secure fittings
• Adjust clevis and set free play per your throttle component’s specs

What build features improve durability and performance?

The GXARTS cable uses a robust inner wire and an abrasion-resistant braided outer sleeve to extend service life and keep throttle movement smooth. Quality control includes machine testing during manufacture plus manual inspections before shipment to help ensure a reliable part reaches your shop.

• Braided outer sleeve resists abrasion in tight engine bays
• High-quality inner conductor for consistent throttle response
• Manufacturing tests and warehouse inspections for reliability
• Designed to be trimmed without sacrificing structural integrity

What maintenance or checks should I perform after installation?

After installing and trimming the cable, check for smooth travel, adequate return spring force, and correct idle adjustment. Periodically inspect the sleeve for fraying and the fittings for loosening, and re-lube the inner wire as part of routine maintenance if accessible.

• Verify full-range throttle travel and no binding
• Confirm secure end fittings and correct free play
• Inspect braided sleeve for wear and replace if damaged
• Re-lubricate wire if performance becomes stiff

Who is this for: The GXARTS 36" throttle cable is aimed at mechanics, hobbyists, and builders performing LS swaps, custom hot rod projects, or replacements on compatible LS1 engines who need a robust, adjustable accelerator cable. If you want a cable that can be shortened to fit custom routing, resists abrasion, and is built with production-level testing, this is a practical option. For exact fitment, verify your specific throttle linkage and end-fitting requirements before trimming and installation.