HARIFOGER 280mm (11") Rear Shock Absorber for ATV & Pit Bike — Red Coil, 1000lbs Load, 40mm Travel

HARIFOGER 280mm (11") rear shock absorber is a lightweight aluminum-alloy suspension unit for 50cc–250cc pit bikes and ATVs that delivers up to 1000lbs load capacity and improved damping control.

This rear shock is built from aluminum alloy with ABS components and designed to replace common stock rear shocks on pit bikes, dirt bikes, quads and small motorcycles. It measures 280mm (eye-to-eye) with 10mm mounting holes, offers 40mm travel, and pairs a red coil spring with a black body for a durable, high-visibility fit. The unit ships ready to install and is intended for riders who need stiffer rear support for heavier loads or more aggressive riding without significant weight penalty.

Will this shock fit my pit bike or quad?

If your current rear shock has an eye-to-eye length around 280mm (11") and mounting holes approximately 10mm diameter, this HARIFOGER shock is likely compatible. Always measure your existing shock from center-to-center of the mounting eyes and verify eye inner diameter before purchase to ensure a proper match.

• Eye-to-eye length: 280mm (11").
• Mounting eye inner diameter: 0.4" (10mm).
• Spring diameter: 0.43" (11mm); travel: 40mm (1.6").
• Intended for many 50cc–250cc pit bikes, dirt bikes and ATVs with same mounting size.

How does the 1000lbs rating affect ride and load capacity?

The 1000lbs max loaded specification describes the shock’s resistance and load-managing ability rather than the vehicle’s gross weight limit. In practice, a higher rated shock provides firmer support under heavier loads and helps control sag and rebound in demanding conditions.

• Max loaded capacity per shock: 1000lbs for stronger support.
• Improves damping for heavier riders or cargo without large volume increase.
• 40mm travel balances compact size with useful suspension movement.

What materials and durability can I expect?

HARIFOGER combines aluminum alloy for a lightweight structure with ABS parts for impact resistance and long-term wear protection. The coated spring and sealed assembly protect internal components from dirt and moisture commonly encountered off-road.

• Body material: aluminum alloy for reduced weight and corrosion resistance.
• Trim and protective components: ABS for impact resistance.
• Red/black finish for visibility and rugged style.

How easy is installation and what should I check before ordering?

Installation is straightforward for mechanically inclined riders: remove the old shock and mount the new unit using the existing bolts if dimensions match. Confirm eye-to-eye length and eye inner diameter, and check that travel and spring rate suit your riding style to avoid unwanted handling changes.

• Check measurements: 280mm eye-to-eye and 10mm mounting holes.
• Use OEM bolts if they match diameter and length; torque to factory specs.
• Test ride gently after install, retighten fasteners and recheck alignment.

Who this is for: This HARIFOGER rear shock absorber suits pit bike and small dirt bike owners, ATV riders, and DIY mechanics who need a compact, stiffer rear suspension for heavier loads, more responsive damping, or to replace worn stock shocks. It’s ideal for 50cc–250cc machines with matching mounting dimensions and for riders seeking a balance of lightweight construction and higher load handling in an affordable aftermarket unit.