HERISKEER 24V LiFePO4 Battery Charger 10A — 29.2V Smart Charger with Anderson Connector & LED

HERISKEER's 24V/29.2V 10A LiFePO4 smart charger delivers fast, safe charging for 24V lithium iron phosphate (LiFePO4) batteries from 30Ah to 150Ah.

If you use 24V LiFePO4 battery banks in an RV, boat, solar off-grid setup, or other deep-cycle application, this compact HERISKEER charger is built to refill your batteries quickly while protecting them from overcharge and heat. It is a two-stage charger (constant current then constant voltage) with an M8 terminal ring and a 50A Anderson connector for easy hookup, plus a multicolor LED to show charging status.

How fast will this charger replenish my 24V battery?

This model delivers up to 10 amps, so you can estimate charge time by dividing the battery amp-hour capacity by 10. For example, a 50Ah battery will typically finish charging in about five hours under normal conditions, while a 100Ah pack will take roughly ten hours.

• Max output: 10A continuous
• Simple charge math: Battery Ah ÷ 10 = approximate hours
• Two-stage control reduces time at full current as the battery reaches voltage
• Multicolor LED indicates when charging (red) and charged (green)

Will this charger work with my battery and connectors?

The HERISKEER charger is made for 24V LiFePO4 battery systems (29.2V nominal charge) and supports battery capacities from about 30Ah up to 150Ah. It includes M8 terminal rings for direct battery posts plus an added 50A Anderson connector for quick-disconnect setups.

• Compatible voltages: 24V / 29.2V LiFePO4 configurations
• Connector options: M8 terminal rings and 50A Anderson connector included
• Suitable for most 24V LiFePO4 deep-cycle packs used in RVs, boats, and off-grid systems
• Not intended for lead-acid or damaged battery packs

What safety and battery-care features are included?

The unit uses a smart two-stage charging algorithm to limit stress on cells and includes built-in protections against overcharge, overheating, and short circuits. The charger also adjusts current based on battery condition to minimize risk and extend usable battery life.

• Two-stage charging: constant current then constant voltage
• Overcharge, overheat, and short-circuit protection
• Automatic current adjustment for battery condition
• LED status indicator to monitor charge progress

How should I install and use this charger safely?

Install on a dry, ventilated surface and connect either the M8 rings to battery terminals or the Anderson plug to a compatible harness. Avoid using the charger with wet batteries, damaged packs, or lead-acid chemistry; monitor temperature during the first charge and follow normal battery safety practices.

• Mount in a dry, ventilated location away from direct moisture
• Use correct connector: M8 rings for direct terminals or 50A Anderson for harnesses
• Do not use on lead-acid batteries or broken battery packs
• Monitor battery temperature on initial charges

Who is this for: The HERISKEER 24V/29.2V 10A LiFePO4 charger suits RV owners, small-boat operators, off-grid solar users, and anyone maintaining 24V LiFePO4 deep-cycle banks between 30Ah and 150Ah who needs a compact, faster charger with safety protections and easy connections. If you're unsure about voltage compatibility or connector style, double-check your battery specs before purchasing.