Hooke Road US Army Military Star Car & Truck Decals, 2-Pack 16.1in Weather-Resistant Vinyl

These Hooke Road military star vinyl decals are a 16.1 x 16.1-inch two-piece sticker set designed to add authentic US Army styling to cars, trucks, Jeeps, and F150s with easy, bubble-free application.

Give your vehicle a rugged, military-inspired look without permanent modification. The set includes two durable vinyl stars sized at 16.1 inches square, made for exterior use on painted surfaces, windows, hoods, doors, or tailgates. They apply quickly with standard decal techniques and remove cleanly when you want to update your vehicle’s appearance. The decals are cut to precise dimensions so they sit flat and look proportional on full-size trucks and off-road vehicles.

How do I apply these decals cleanly and avoid bubbles?

Applying these Hooke Road vinyl decals is straightforward if you prepare the surface and use a squeegee or soft card to smooth the film. Work from the center outward to push out air pockets and keep the decal aligned as you go. For large decals, consider wet-application to allow repositioning before final contact.

• Clean surface with isopropyl alcohol and dry fully before application
• Use a spray bottle with water + a few drops of dish soap for wet application
• Squeegee from center to edges to remove air and water
• Trim excess material if needed for curved panels

Will these stickers hold up outdoors and on vehicle paint?

These decals are crafted from weather-resistant vinyl suitable for exterior vehicle use. They withstand typical road exposure such as sun, rain, and light washing when applied to properly prepared surfaces. For extended longevity, avoid automatic high-pressure washing and prolonged exposure to abrasive chemicals.

• Durable vinyl resists fading under sunlight
• Adhesive formulated for automotive surfaces
• Removeable without heavy residue when peeled carefully
• Best lifespan when hand-washed and air-dried

What size and placement options work best for trucks and Jeeps?

Each star decal measures 16.1 inches by 16.1 inches—large enough to be prominent but compact enough to fit hoods, doors, and tailgates. On full-size trucks like the Ford F150, place one decal centered on the hood or both on door panels for symmetry. For Jeep Wranglers, the hood or rear side panels provide strong visual impact without interfering with vents or seams.

• 16.1" x 16.1" per decal, fits most truck hoods and panels
• Center hood placement creates authentic military look
• Door or tailgate placement offers balanced styling
• Avoid placing over seams, vents, or textured surfaces

How do I remove or reposition the decals later?

Removal is simple: warm the adhesive with a hair dryer or heat gun on low, lift an edge, and peel slowly at a shallow angle. Any leftover adhesive can be wiped away with adhesive remover or isopropyl alcohol and a soft cloth. Repositioning after full adhesion is not recommended, but wet-application allows limited adjustments during installation.

• Warm decal before peeling to soften adhesive
• Peel slowly and evenly to avoid tearing paint or leaving residue
• Use isopropyl alcohol to remove sticky residue
• Test remover on an inconspicuous area first

Who is this for? Vehicle owners who want a bold, military-inspired accent without permanent modifications will appreciate this Hooke Road decal set. It's ideal for truck and Jeep enthusiasts, vintage military vehicle restorers, or anyone wanting a rugged aesthetic for daily drivers. If you value easy installation, weather-resistant materials, and removable graphics sized for hoods and panels, this two-piece 16.1-inch set delivers an authentic look with minimal effort.