InoKraft Disposable Paint Spray Gun Cup System — 22 oz (650 ml), 45 Liners, 125µm Filter & Reusable Hard Cup

InoKraft's Disposable Paint Spray Gun Cup System is a complete 22-ounce (650 ml) kit that includes one reusable hard cup, 45 disposable liners, 45 filter lids, 20 sealing plugs and a retainer ring to simplify mixing, filtering, spraying and storage.

This kit is built for painters who want a low-fuss way to handle paints, primers, epoxies and commercial coatings without repeated cup cleaning. The system uses single-use liners with pre-measured markings and 125-micron integrated lids so you can mix directly, strain material and swap liners between color changes. It’s compatible with many HVLP and LVLP spray guns when used with the correct adapter (adapters not included).

How does this system save time on prep and cleanup?

By combining a disposable liner with a built-in filter lid and storage plugs, you reduce the need to flush and scrub conventional metal cups. Swap a fresh liner in seconds and reuse the hard outer cup and ring, cutting down solvent use and labor.

• Includes 45 single-use liners to avoid cleaning after every color change
• Measurement lines on liners let you mix directly in the cup
• Sealing plugs allow short-term storage without transferring material
• One reusable hard cup and retainer ring reduce waste and costs

Will the cups work at unusual spray angles or with different coatings?

The liner-and-lid design seals tightly so you can spray at steep angles or even upside down with consistent material feed. The 125-micron filter in each lid helps remove debris for smoother application and the liners accept a wide range of coatings from lacquers to heavier epoxies.

• Secure seal lets you spray at any angle without leaks
• 125-micron lids filter out particulates for a cleaner finish
• Compatible with many common automotive, marine and industrial coatings
• Not intended for pressurized or specialty closed-cup systems

How do I fit these cups to my HVLP or LVLP gun?

The kit’s lid is compatible with a variety of spray gun adapters sold separately; verify your gun’s adapter model before purchase. The hard cup, retainer ring and liners assemble in five parts for quick installation and secure mounting to most standard cup-style gun setups.

• Assembles in five parts: hard cup, retainer ring, liner, lid, plug
• Use the correct adapter for your gun (adapters not included)
• Fits many original-style adapters (check compatibility with 2.0-style fittings)
• Simple retainer ring locks the liner and lid in place for reliable use

What filtration and finish quality can I expect?

The kit’s lids include 125-micron mesh filters to reduce specks and contaminants before material reaches the gun’s fluid passages. Compared with coarser filters, the finer mesh helps produce a smoother, more even coat when used with properly thinned materials and a compatible spray setup.

• 125-micron built-in filter per lid for finer straining
• Helps minimize particulates that cause surface imperfections
• Works best when combined with recommended thinning and gun settings
• Lids and liners are disposable for consistent, clean filtration every change

Who is this for: The InoKraft Disposable Paint Spray Gun Cup System is suited for hobbyists, auto refinishers, marine painters and light industrial users who want faster changeovers, reduced solvent use and cleaner filtration without replacing their entire spray gun. If you frequently switch colors, work with multiple coatings, or want a simpler cleanup routine while keeping a reusable outer cup, this kit provides a balance of convenience and performance.