J-B Weld WoodWeld Syringe, Light Tan, 25ml 2 Pack

J-B Weld WoodWeld Syringe is a fast-setting, two-part epoxy designed specifically to bond and repair wood, curing to a sandable light tan that can be shaped, drilled and finished.

Whether you are repairing a broken chair leg, filling a missing section on trim, or rebuilding a wooden model, WoodWeld gives you a durable, machinable bond. This 2-pack includes two 25 ml dual-syringes with a 1:1 mixing ratio so resin and hardener dispense evenly; it sets rapidly and reaches serviceable cure quickly while matching wood tones with its light tan finish.

How fast will WoodWeld set and when can I sand or drill it?

WoodWeld begins to set within about 15 minutes and reaches a workable cure soon after, allowing light shaping. Once fully cured to its final hardness, you can sand, drill, tap and paint the repair just like wood.

• Mixing ratio: 1:1 for accurate, reliable cures
• Initial set: approximately 15 minutes
• Workable cure: typically within about 30 minutes (depends on temperature)
• Finishable: sands, drills, taps, and accepts paint and stain

Is WoodWeld strong enough for structural wood repairs?

WoodWeld develops a bond strength that exceeds many woods, offering long-term durability for repairs and joins. Its cured tensile strength provides a robust hold for furniture, cabinetry and load-bearing trim when used properly with correct surface prep.

• Tensile strength: rated at 3,770 PSI for high-strength bonds
• Ideal for reattaching broken pieces, reinforcing joints, and filling voids
• Works best on clean, dry, and roughened surfaces for mechanical adhesion

How do I apply the syringe and avoid waste between uses?

The dual-syringe dispenses equal parts resin and hardener for correct mixing every time; extrude directly onto a mixing pad and combine until uniform. Each syringe includes a resealable no-waste cap so remaining adhesive stays protected between sessions.

• Dispense equal volumes from both barrels to ensure proper cure
• Mix thoroughly on a nonporous surface until color and texture are uniform
• Resealable cap preserves leftover adhesive for later projects

What color and finish can I expect after curing?

WoodWeld cures to a light tan that blends well with many woods and takes stain or paint for a near-invisible repair. After sanding, the cured epoxy accepts common wood finishes so you can match grain and sheen.

• Final color: light tan for natural-looking fills
• Surface finish: sands smooth and accepts paint or stain
• Can be carved, tapped or machined once fully cured

Who is this for: WoodWeld is intended for woodworkers, furniture restorers, carpenters, hobbyists and DIY homeowners who need a high-strength, machinable adhesive for bonding, filling and repairing wood. If you value a quick set time, a finishable color, and a resealable delivery system, this 25 ml two-pack gives a convenient supply for both occasional fixes and small project work.