Jeemiter 3/8" ID Fuel Hose 25ft Kit — SAE 30R7 NBR, 300 PSI, Includes 10 Clamps

Jeemiter's 3/8" ID Fuel Hose 25FT kit is a professional-grade SAE 30R7 NBR fuel line designed to carry gasoline, diesel, biodiesel and engine oil safely, and includes ten clamps for secure installation.

This complete hose kit supplies a long, flexible fuel line built to handle tough conditions and frequent installations. Made from oil-resistant NBR and certified to SAE 30R7 standards, the 25-foot length and 3/8-inch inner diameter fit many small-engine, automotive, and marine fuel applications. The package includes ten corrosion-resistant clamps so you can assemble or replace connections without searching for fittings.

What pressure and temperature limits can this fuel hose handle?

The Jeemiter hose is engineered for demanding service with a 300 PSI working pressure and a 1,160 PSI burst rating for short-term overload protection. Its NBR compound tolerates a broad thermal envelope so it stays flexible and durable in extreme weather.

• Working pressure: 300 PSI
• Burst pressure: 1,160 PSI
• Operating temperature range: -40°F to 257°F
• Material: oil-resistant NBR for fuel compatibility and longevity

Is this hose compatible with my vehicle or marine craft?

This 3/8" inner diameter hose suits many small engines, motorcycles, cars, trucks, and outboard/auxiliary marine systems where SAE 30R7 fuel lines are specified. It is formulated to transport gasoline, diesel, biodiesel, engine oil, hydraulic fluids, water and compressed air in non-pressurized or moderate-pressure circuits.

• Fits 3/8" ID fuel fittings and most standard barb connectors
• Approved to SAE 30R7 for automotive fuel and engine oil lines
• Suitable for boats, ATVs, lawn equipment, and light trucks
• Not for high-pressure fuel injection systems without proper adapters

What comes in the kit and how easy is installation?

The kit contains a single 25-foot length of 3/8" ID SAE 30R7 NBR hose plus ten hose clamps for secure joins. Its lightweight construction and kink-resistant flexibility let you route the line through tight engine bays and around obstacles with minimal effort.

• One 25-foot, 3/8" inner diameter SAE 30R7 NBR hose
• Ten corrosion-resistant clamps for multiple connection points
• Flexible design for easy routing and trimming to length
• Can be cut cleanly and attached with standard fuel fittings

How should I verify compatibility and safety before using this hose?

Measure your system's pressure, fitting size and fuel type before installation to ensure SAE 30R7 and 300 PSI working pressure meet your requirements. Inspect fittings, clamps and routed runs regularly for wear, chafing or leaks and replace if any damage appears.

• Confirm your system does not exceed 300 PSI continuous pressure
• Use the included clamps and recommended fittings for secure connections
• Avoid contact with sharp edges and hot exhaust components
• Replace after visible degradation or after long-term chemical exposure

Who is this for? Technicians, DIY mechanics, marine owners and fleet operators who need a reliable, oil-resistant replacement or installation hose will find this Jeemiter kit useful. It’s intended for fuel and fluid transfer in small engines and light automotive/marine systems where SAE 30R7 compliance, a 3/8" ID, and a long, flexible run are required. For fuel-injection lines or systems that demand specialized fittings or higher continuous pressure, consult your equipment manual or a professional before use.