Jetuplusllc Sea‑Doo Drive Line Rebuild Kit with Carbon Seals & Boot for 787/800 SPX XP (1996–2007)

Complete Sea‑Doo carbon seal drive line rebuild kit and replacement boot designed to restore sealing and support for many 1996–2007 models.

This rebuild kit from Jetuplusllc contains the core components needed to service the Sea‑Doo drive line: carbon sealing rings, support ring, shaft C‑clip, two O‑rings and the shaft boot. All parts match OEM fit and function to help you replace worn seals, stop leaks and reestablish proper shaft alignment without hunting for individual parts.

Which Sea‑Doo models and years does this kit fit?

The kit is manufactured to fit a broad range of Sea‑Doo personal watercraft spanning late 1990s to mid‑2000s models. Fitment covers SP, SPI, GS, GTI, GTS, GTX, SPX, XP and several RFI/DI variants. Always cross‑check part numbers and model year before installation.

• Compatible models: SP, SPI, GS, GTI (LE, RFI), GTS, GTX, SPX, XP and variants
• Years covered: primarily 1996–2007 depending on model
• Manufacturer part numbers included for verification: 272000042, 272000777, 272000064, 293300032

What components are included and what do they do?

The package supplies the parts required for a full drive line seal service so you can address leaking or damaged drive boots and carbon seals in one repair session. Each piece is selected to meet OEM dimensions so installation is straightforward when following manufacturer procedures.

• Shaft boot (272‑000‑041 / 272‑000‑184 / 272‑000‑167) — protects joint from water and debris
• Carbon sealing ring(s) (272‑000‑042 / 272‑000‑777) — primary shaft seal surface
• Support ring (272‑000‑064) — backing for correct seal seating
• Drive shaft C‑clip (272‑000‑135) and Qty.2 O‑rings (293‑300‑032) — retainers and secondary seals

How will installing this kit improve my watercraft’s performance?

Replacing worn seals and a damaged boot helps prevent water intrusion and bearing contamination, which protects the drive components and prolongs service life. Proper sealing also reduces the risk of shaft misalignment or vibration caused by failed seal assemblies.

• Stops shaft leaks that can damage bearings and drives
• Restores correct shaft support and alignment
• Reduces risk of premature component wear and vibration

What should I know before starting the rebuild?

Basic mechanical skill and access to a workshop manual are recommended; correct torque values and assembly order matter for reliable sealing. Inspect the shaft and housing for scoring or wear before assembly — severely damaged surfaces should be repaired or replaced to avoid repeated failure.

• Have Sea‑Doo service manual and proper tools on hand
• Check shaft and bore for wear; replace if scored or pitted
• Clean mating surfaces and lubricate O‑rings per instructions before fitting

Who is this for: This rebuild kit is best for Sea‑Doo owners, marine mechanics and hobbyists servicing late‑1990s to mid‑2000s models who want an OEM‑quality parts bundle to repair drive line leaks and restore reliable shaft sealing. It’s ideal when you need all the essential components in one purchase for a complete drive line service.