JRready Deutsch DT Connector Kit ST6313 — 604-Pc 2/3/4/6/8/12‑Pin Set with Size‑16 Solid Contacts & Tools

JRready ST6313 is a 604-piece Deutsch DT connector kit that supplies 2/3/4/6/8/12-pin sealed PA66 housings, 185 size‑16 solid contacts, seal plugs and removal tools to build and repair automotive and equipment wiring harnesses.

This comprehensive Deutsch DT kit is made to solve common harness repair and upgrade tasks for cars, trucks, trailers, marine craft and off‑road vehicles. It combines sealed PA66 nylon connector bodies rated for wide temperatures with Pb‑free solid size‑16 contacts designed for 14–20 AWG wire. The assortment reduces trips to parts bins and ensures you have the right pin counts, seals and tools when rebuilding or modifying DT series connections.

How does this kit make wiring repairs faster and more reliable?

The ST6313 gathers multiple frequently used DT housings, a large set of solid contacts, seal plugs and extraction tools so you can complete repairs on the spot without scavenging parts. Using solid contacts sized for 14–20 AWG wires increases mechanical grip and contact stability compared with some stamped contacts, which reduces intermittent faults on vibration‑prone equipment.

• 604 total pieces: 50 pairs of 2/3/4/6/8/12‑pin housings, 185 pairs of size‑16 contacts, 30 seal plugs, 4 removal tools.
• Solid Pb‑free size‑16 contacts tested for improved electrical and mechanical performance.
• Includes extraction tools to remove contacts without damaging housings.

Will the connectors hold up in wet, dusty, or high‑heat environments?

Yes — JRready DT housings are molded from flame‑retardant PA66 nylon with an operating range from −40°C to 125°C and meet UL94 V‑0 ratings. Sealed assemblies achieve IP67 level protection when correctly assembled with the supplied seal plugs, so connections remain reliable in marine, off‑road or engine‑bay conditions.

• PA66 nylon housings resist cracking and deformation under heat and vibration.
• Seal plugs and proper assembly provide dustproof and waterproof sealing (IP67 when properly installed).
• UL94 V‑0 flame‑retardant material for safer electrical installations.

What wire sizes and currents are supported by the contacts in this kit?

The kit’s size‑16 solid contacts are designed for 14–20 AWG wires and, when crimped and installed correctly, support circuits up to about 13A depending on application conditions. Always confirm your connector series, wire gauge and current requirements before use to match the kit to your specific wiring demands.

• Size‑16 solid contacts for 14–20 AWG wires — common for lighting, sensors and accessory feeds.
• Per‑contact current rating up to approximately 13A when properly crimped and assembled.
• Kit covers common DT pin counts: 2, 3, 4, 6, 8 and 12 positions.

How do I know this kit matches my Deutsch DT connectors?

This ST6313 kit is made specifically for Deutsch DT series housings that accept size‑16 contacts. To ensure compatibility, check your existing connector’s series designation, measure the wire gauge you use, and confirm the pin count. Using mismatched series or contact sizes can lead to poor mating and unreliable connections.

• Designed for Deutsch DT series with size‑16 contacts — verify your connector series first.
• Intended for 14–20 AWG; check your wire sizes before crimping.
• Includes multiple pin‑count housings to match common DT configurations.

Who is this for? JRready ST6313 is aimed at mechanics, fleet technicians, marine electricians, off‑road builders and hobbyists who need a single, well‑stocked kit to repair or upgrade Deutsch DT harnesses quickly. It’s useful wherever sealed, vibration‑resistant connections are required — engine bays, trailers, agricultural equipment, auxiliary lighting and sensor circuits — provided the DT series and wire gauge match your application.