KBS Coatings DiamondFinish Watercolor Clear Coat — 1 Pint High‑Gloss, Single‑Part Hard Clear for Metal & Paint

This one‑pint clear coat blends industrial durability with easy application. Formulated to go directly onto metal and over existing paint without additives, the DiamondFinish Watercolor Clear delivers a tough, high‑gloss protective layer that resists abrasion and preserves color depth. Because it is single‑component, there’s no mixing of hardeners required—making it a practical choice for one‑person projects, touchups, and small refinishing jobs.

How will this clear coat behave on metal and painted surfaces?

The formula bonds to both bare metal and cured paint, forming a hard, protective film. It seals substrates to reduce corrosion risk on metal and locks in paint pigments for longer color life. Its self‑leveling characteristic smooths out application strokes for an even appearance.

• Adheres directly to metal without primers in many situations
• Compatible with existing painted finishes for topcoating
• Single‑part chemistry yields a harder film than many two‑part clears
• Self‑leveling reduces brush marks and roller texture

What application methods and preparation steps work best?

DiamondFinish can be brushed, rolled, or sprayed depending on project scale and preference. Surfaces should be clean, dry, and free of loose rust, oils, or contamination; light sanding of glossy paint helps promote adhesion. Follow typical shop practices for ventilation and temperature control to ensure proper flow and cure.

• Brush or roller for small repairs and edges; HVLP/air spray for larger areas
• Remove grease and dirt, then scuff sand for glossy surfaces
• Apply in thin, even coats to avoid runs and improve leveling
• Allow recommended flash times between coats for best hardness

How much coverage and durability can I expect from one pint?

One pint of this clear coat covers up to about 50 square feet depending on application thickness and surface texture. The cured film is formulated to be tougher and harder than many two‑part clears, offering enhanced resistance to everyday wear, light abrasion, and environmental exposure when applied correctly.

• Approximate coverage: up to 50 sq ft per pint under typical coating thickness
• Single‑part hardness provides robust surface protection
• Best durability when applied in recommended thin coats
• Seals both paint and metal to extend finish life

Who is this for? KBS Coatings 8304 DiamondFinish Watercolor Clear Coat is designed for hobbyists, restoration enthusiasts, small body shops, and DIY mechanics who need a no‑fuss topcoat that delivers professional‑grade hardness without mixing hardeners. It’s particularly useful for touchups, custom metalwork, ATV and motorcycle components, toolboxes, and decorative metal projects where a resilient, glossy finish is desired. If you want a clear that seals paint and metal, levels out for a smooth look, and doesn’t require two‑part mixing, this product is built for those scenarios.