Keiurot 12V LED Light Strip for Cars 24-inch Red — 4-Pack, waterproof IP68 & connectable

Keiurot 12V red LED light strips are 24-inch, waterproof, connectable accent lights designed to add low-voltage illumination to vehicles and small spaces.

These compact, flexible LED strips come as a 4-pack of 24-inch (60×1 cm) red SMD strips that can be joined end-to-end to create a continuous 48-inch run. Built for automotive and marine use, each strip runs on DC 12V, uses just 0.26A (≈3.2W), and includes a 100cm 22AWG lead for plug-and-play hookup. The IP68-rated silicone coating resists water and UV exposure, while a durable nano-adhesive on the back keeps the strips mounted cleanly in tight gaps.

How can I extend or trim the Keiurot strips to fit my vehicle?

You can connect two 24-inch strips to form a single 48-inch light source using the integrated connectors, or shorten a strip by cutting at marked points. Cut lines occur every three LEDs to preserve circuit integrity—follow the marking on the silicone channel and have a qualified person perform electrical modifications if unsure.

• Connect two strips for a total 48-inch run.
• Cut only at the printed cut points every three LEDs.
• Use the included 100cm 22AWG lead to reach a 12V source without extra wiring.

Will these strips tolerate outdoor and wet conditions?

The Keiurot strips are rated IP68 for water and dust resistance, making them suitable for exposed areas like boat decks, undercarriage accents, or engine bay accent lighting. The flexible silicone housing also protects the SMDs from UV and moisture, so they hold up in damp or marine environments when installed correctly.

• IP68 silicone jacket resists immersion and dust ingress.
• UV-stable material for reduced fading in sunlight.
• Thin profile fits tight crevices like footwells and grilles.

How easy is installation and electrical hookup?

Installation is straightforward: peel the backing from the strong nano-adhesive tape and press the strip onto a clean, dry surface. Each strip ships with a 100cm lead wire (red = positive, black = negative) so you can connect directly to a 12V source; no extra extension cables are typically required.

• Pre-attached nano-adhesive for fast stick-on mounting.
• 100cm 22AWG lead wire included for simple 12V connection.
• Low-profile design allows semi-hidden placement under dash or trim.

What performance and package details should I expect?

Each strip contains 36 SMD LEDs across its 24-inch length and draws about 0.26A at 12V (roughly 3.2W). The pack includes four identical strips so you can light multiple areas or combine them for longer runs. Because the strips run on standard 12V DC, they are compatible with most automotive, marine, and RV power systems.

• 24 in (60×1 cm) per strip, four strips included.
• 36 SMD LEDs per strip; output ~0.26A @ 12V (3.2W).
• Cuttable every three LEDs; connectable to reach 48 in when paired.

Who is this for? Keiurot red LED strips suit car and boat owners, DIY van and RV outfitters, and anyone seeking low-voltage accent lighting for interiors or exterior trim. They’re ideal for footwell, grille, cargo area, deck, or ambient party lighting where a flexible, waterproof, plug-and-play red light is desired. If you need longer continuous runs, precise cuts, or professional-grade wiring, consider having an experienced installer perform the connections.