KEMIMOTO UTV Windshield Washer & Wiper Kit 12V — 20.8in Blade, Compact Reservoir, Easy-Install

KEMIMOTO's UTV windshield washer pump kit pairs a 12V electric wiper motor with a compact washer reservoir to add spray-and-wipe capability to many side-by-sides and golf carts.

This kit combines a 12V windshield wiper motor, a 20.8-inch wiper blade and arm, a small washer bottle and pump, plus the plumbing and mounting hardware needed to retrofit washers and wipers on compatible UTVs. It’s designed for riders who need basic windshield cleaning and wiping on off-road vehicles where factory systems were not installed or were removed. The components are engineered for straightforward installation with common tools, though some drilling and trimming may be required depending on your vehicle’s windshield style and fitment.

Which vehicles will this KEMIMOTO kit work on?

The assembly is broadly compatible with many popular UTV models, especially those with less obstructed windshields and existing mounting access. It’s commonly fitted to Polaris RZR and Ranger models, Can-Am Commander and Defender series, various Can-Am and Yamaha Mavericks, Honda Pioneers, and many golf carts. Confirm measurements and windshield frame details before ordering to avoid misfitment.

• Compatible with Polaris RZR and Ranger 570/900/1000 models
• Fits Commander 800/1000 and Defender series
• Works with Maverick X3, Maverick, Pioneer 1000, and select golf carts
• Not suitable for full windshields that have a surrounding black frame

How large are the parts and what should I measure?

The wiper assembly measures about 530 mm (20.8 inches) overall and uses a 16-inch rubber blade that reaches most midsize UTV windshields. The washer bottle is compact — roughly 7.08 × 3.54 × 4.7 inches — and the kit includes 4 meters of water tubing and a 3-meter wiring loom. Measure your windshield width and check for frames or obstructions to ensure the blade length will clear safely.

• Wiper arm assembly: 530 mm / 20.8 in
• Rubber blade length: 16 in (blade may extend past small windshields)
• Washer bottle dimensions: 7.08" × 3.54" × 4.7"
• Plumbing and wiring: 4 m water pipe, 3 m wiring harness

What does installation involve and what tools are needed?

Installation is intended for do-it-yourselfers comfortable with basic vehicle work. Mounting the motor typically requires drilling a 1/2-inch hole in the windshield or mounting surface and routing the provided tubing and wiring to the reservoir and power source. The kit includes the motor, blade, arm, pump, tubing and necessary hardware; you’ll need hand tools, a drill, fasteners, and possibly sealant or cable ties for a clean install.

• May require drilling a 1/2" mounting hole for the motor
• Electrical connection to a 12V power source (vehicle battery)
• Basic hand tools and common fasteners recommended
• Installation steps illustrated in the product images for guidance

How should the washer fluid be handled and maintained?

The washer reservoir in this kit sits low in the tank and is not designed to auto-fill, so pour fluids carefully. Use only clean water — avoid soaps or detergents that could clog the pump or damage seals. Periodically check tubing for kinks and the pump for operation to keep spray performance reliable.

• Use pure water; do not use soapy solutions
• Inspect tubing and connections regularly for leaks or blockages
• Keep the reservoir topped off manually; it does not self-refill
• Replace the rubber blade when streaking or cracking appears

Who is this for: This KEMIMOTO windshield washer and 12V wiper motor kit is aimed at UTV owners who want a compact, retrofit cleaning system for off-road windshields — riders of Polaris, Can-Am, Yamaha and many other machines who need a simple, serviceable wipe-and-spray solution rather than a factory integrated system. If you have a frameless or semi-frameless windshield, basic mechanical skills, and want to improve visibility during dusty or wet rides, this kit is a practical, affordable option.