KLEAN-STRIP Aircraft ULTRA Paint Remover Aerosol 15oz — Fast‑Acting Visible‑Lifting for Automotive & Metal Coatings

KLEAN-STRIP Aircraft ULTRA Paint Remover is a fast‑acting, visible‑lifting aerosol designed to remove tough automotive and metal coatings down to bare metal in minutes.

This aerosol paint stripper uses a patent‑pending formula to cut through 2K automotive finishes, epoxies and urethanes, with a clingable spray that works on vertical and hard‑to‑reach areas. It’s formulated for metal, fiberglass and many plastics, producing visible lifting so you can monitor progress as coatings loosen. Note: not intended for real aircraft surfaces or bathtubs.

How quickly will Aircraft ULTRA strip paint from metal?

Aircraft ULTRA is engineered for speed; heavy topcoats begin to lift visibly and can be stripped to bare metal in around 30 minutes under typical conditions. Actual times vary with coating thickness, ambient temperature and substrate.

• Strips to bare metal in ~30 minutes on many automotive coatings
• Visible lifting lets you see progress without constant probing
• Faster than many conventional aerosol strippers on tough 2K finishes

Which surfaces and coatings is it safe and effective on?

The product is formulated for aggressive automotive and industrial coatings — 2K systems, epoxies and urethanes — and performs on metal, fiberglass and both flexible and rigid plastics. Avoid porous wood, bathtub finishes and actual aircraft structures.

• Effective on metal panels and automotive bodywork
• Works on fiberglass repairs and composite components (test first)
• Compatible with many plastics; test small area before full application

How do I apply Aircraft ULTRA for best results?

Shake the can, spray an even coat onto the target area and allow the formula to dwell until coating lifts visibly. Use scrapers or a powered tool as needed to remove softened material, then neutralize and clean the surface per best practices.

• Shake can well before use and spray at recommended distance
• Allow dwell time until visible lifting occurs, then scrape gently
• Rinse or neutralize residue after stripping and prepare surface for refinishing

What safety and use precautions should I follow?

Use in a well‑ventilated area with appropriate gloves and eye protection; avoid skin contact and inhalation of vapors. Keep away from ignition sources and follow local disposal regulations for chemical waste.

• Wear chemical-resistant gloves and splash goggles
• Provide fresh air; use respirator if ventilation is poor
• Do not use on bathtubs or actual aircraft surfaces; follow label directions

Who is this for? Aircraft ULTRA targets professional body shops, restoration specialists and experienced DIYers who need a rapid, visible solution for removing stubborn automotive and industrial coatings. If you require a fast, clingable aerosol that tackles 2K finishes on metal, fiberglass and compatible plastics, and you understand proper safety and disposal practices, this product delivers powerful performance in a convenient 15 oz can.