KOCHCHEMIE Eulex Adhesive Remover 1 L — Fast‑Evaporating, Safe on Paint & Glass

KOCHCHEMIE Eulex is a fast-evaporating adhesive remover that lifts sticker residue, tree sap, tar and grease while remaining safe on paint, clear coat, PPF and glass.

Engineered for professional car care, Eulex dissolves sticky contaminants without leaving a greasy film that re-attracts dirt. Its formulation evaporates quickly, so you can remove residues and move on to polishing or coating without extended dwell time. The product is suited to solvent-resistant surfaces including automotive paint, ceramic, metal and glass.

How does Eulex remove stubborn adhesives without harming paint?

Eulex uses solvency balanced to attack common residues—adhesives, resin, tar and ink—while remaining gentle on clear coats and paint systems. It does not contain aggressive acids or alkalis, reducing the risk of etching or dulling when used correctly.

• Formulated for solvent-resistant surfaces like paint, PPF, and glass
• Removes sticker glue, tape film, sap, tar, grease and ink
• Leaves no sticky residue that attracts new dirt
• Quick evaporation reduces surface dwell and processing time

When should I use Eulex in my detailing workflow?

Use Eulex early in the process after a basic wash and before polishing or coating to clear contaminants that interfere with bonding or finish clarity. It’s ideal for prepping panels, glass and trim where adhesives or tar remain after washing.

• After washing to remove leftover sticker glue and road tar
• Before paint correction or ceramic coating application
• On wheel arches, bumpers and glass for spot-cleaning
• During workshop preparation for resale or inspection

Is Eulex safe for all exterior surfaces on my vehicle?

Eulex is designed for solvent-resistant materials: automotive paint, clear coats, PPF, glass, ceramic and metal. Always test in an inconspicuous area first and avoid prolonged contact with softer plastics or untreated rubber to prevent possible swelling.

• Approved for paint, clear coat, PPF and glass
• Not recommended for non-specified soft plastics without a patch test
• Safe when used as directed; follow label instructions
• Evaporates quickly to limit surface exposure

How do I apply Eulex for best results?

Spray or apply with a microfiber or soft cloth, allow a short dwell, then wipe or lightly agitate to lift residue. For stubborn deposits, repeat application or use a gentle plastic scraper, then rinse or wipe clean and continue with drying or further detailing steps.

• Spray onto cloth or surface; avoid over-saturation
• Wipe with a microfiber towel; repeat if needed
• Use a soft scraper for hardened tar or adhesive
• Finish by rinsing or preparing surface for polish/coating

Who this product is for: KOCHCHEMIE Eulex is made for professional detailers, bodyshop technicians and car enthusiasts who need a reliable, paint-safe solvent to remove adhesives, tree sap, tar and greasy deposit quickly. It’s especially useful when prepping vehicles for paint correction, ceramic coating or sale, and for anyone wanting a residue-free finish without aggressive chemistry.