KSP PERFORMANCE 3" Level Kit for Dodge Ram 1500/2500/3500 2WD — 3in Front Polyurethane Coil Spring Spacers (Black, 2pcs)

KSP PERFORMANCE 3" Level Kit is a front coil spring spacer set that raises compatible Dodge Ram 2WD trucks approximately 3 inches for improved stance and clearance.

If you own a 1994–2018 Dodge Ram 1500 (2WD) or a 1994–2011 Ram 2500/3500 (2WD) and want a straightforward way to lift the front end, this kit provides a simple, bolt-on solution. Made from weather-resistant polyurethane, the pair of spacers installs on top of the factory coil springs to alter ride height without cutting, welding, or replacing struts. Note: this kit does not fit Extended Cab/Mega Cab, Rebel, TRX, or air-ride equipped trucks.

How much lift should I expect and will it affect ride geometry?

Expect about a 3" front lift as an adjusted vehicle height — not the literal thickness of each spacer. Because suspension geometry changes with any lift, the actual vehicle rise is a function of spring rate and factory suspension design, so the kit is calibrated to yield an approximate 3" increase.

• Designed to raise the front roughly 3" on compatible Dodge Rams.
• Spacer thickness and vehicle lift differ due to suspension leverage.
• Alignment is recommended after installation to correct toe and camber.

Will installation require cutting, welding, or special tools?

Installation is intended to be straightforward and typically requires only common hand tools. No cutting or welding is necessary; the spacers sit on top of the OEM coil spring seats. Average install time for a mechanically-inclined DIYer is about two hours per axle pair.

• Bolt-on design; no welding or permanent modifications.
• Typical tools: jack, jack stands, sockets, breaker bar, spring compressor if needed.
• Plan for a professional alignment after installation.

Is this kit durable and suitable for different climates?

The spacers are molded from high-quality polyurethane chosen for weather resistance and fatigue durability. Polyurethane retains shape better than inexpensive rubber pads and is less likely to deform under load, making it suitable for varied temperatures and road conditions.

• High-grade polyurethane construction resists cracking and weathering.
• Maintains lift height under repeated load cycles better than softer materials.
• Rubber factory pads can be removed; spacer design reduces unwanted noise and rebound.

Which models and exclusions should I double-check before buying?

This kit fits many 2WD Dodge Rams but has definite exclusions you must verify against your VIN and suspension type. It does not fit Extended Cab/Mega Cab models, Rebel or TRX trims, or trucks equipped with air ride suspensions. It coincidentally shares dimensions with some rear springs from Honda Passport/Isuzu Rodeo, but application is built around Dodge Rams.

• Compatible: Dodge Ram 1500 (2WD) 1994–2018; Ram 2500/3500 (2WD) 1994–2011.
• Not compatible: Extended Cab/Mega Cab, Rebel, TRX, or air-ride trucks.
• Always confirm year/make/model and suspension type before purchase.

Who is this for: The KSP PERFORMANCE 3" Level Kit is aimed at Dodge Ram owners who want a cost-effective, reversible front lift to gain clearance for larger tires, achieve a more aggressive stance, or correct a sagging front end. It suits DIY mechanics and professional installers who prefer a non-destructive spacer solution made from durable polyurethane. If you need more than a modest front lift, or you have air suspension or non-standard cab configurations, consider alternative suspension upgrades designed for those setups.