KTUMININV Mini Bike Air Filter Adapter Kit 62mm — for Predator 212cc & GX160/GX200 Clones, Pleated High-Flow

KTUMININV's upgraded 62mm mini bike air filter adapter kit converts small-engine carburetors to a larger, high-flow intake that improves airflow and filtration for Predator 212cc, 224cc, 196cc and compatible GX160/GX200-style engines.

This compact kit replaces the stock intake with a 62mm pleated filter, metal mesh prefilter and a reinforced metal base to supply cleaner air at higher volume for go-kart, mini bike and small utility engine applications. It includes the adapter interface, inlet pipe and installation tools so you can fit the unit to a range of carburetor flanges commonly found on Coleman CT200U, BT200X, KT196 and similar models. The components are designed for durability and straightforward installation while maintaining compatibility with several clone engine platforms.

Will this adapter fit my Predator 212cc or 196cc clone?

The kit targets Hemi and non-Hemi Predator 212cc and similar 224cc/196cc 6.5 hp engines and also supports many GX160/GX200-style clone engines. Fitment depends on your carburetor throat diameter and flange type, so verify measurements before purchasing.

• Compatible engines: Predator 212cc/224cc/196cc and GX160/GX200 clones.
• Common vehicle fits: Coleman CT200U, BT200X, KT196, Massimo and several Mini Baja models.
• Key measurement: 62mm intake diameter and included adapter interfaces.
• Check bolt pattern and carburetor throat to confirm fit.

How does the filter change performance and airflow?

The larger 62mm intake and pleated filter media increase the surface area for air to pass through, improving total airflow to the carburetor while still blocking dust and debris. The metal mesh prefilter and reinforced base help the unit stand up to vibration and heat in off-road use.

• Pleated filter paper for greater filtration area and airflow.
• Metal mesh layer extends service life and screens larger particles.
• Upgraded metal base resists deformation under heat and pressure.
• Designed to feed more clean air into the carburetor throat.

What is included and how hard is installation?

The package arrives with the 62mm air filter, a 12mm cold intake prefilter, an adapter interface kit, an inlet pipe and two installation tools. Installation is intended to be user-friendly for home mechanics with basic tools; follow included instructions and confirm your carburetor flange matches one of the adapter interfaces.

• Contents: 62mm air filter, 12mm cold intake filter, adapter interface kit, inlet pipe, two install tools.
• Tools included for clamp and seal assembly; additional hand tools may be required.
• Typical install time: 15–45 minutes depending on vehicle and familiarity.
• Verify sizes and orientation before final tightening to prevent leaks.

How do I care for and maintain the filter?

Routine maintenance keeps the filter working effectively: inspect for clogged media, clean or replace the pleated element per use conditions, and check seals and clamps for tightness after initial runs. The metal components tolerate cleaning and reinstallation, while the paper media should be replaced if saturated or damaged.

• Inspect after heavy off-road use or dusty conditions.
• Clean the mesh prefilter with compressed air or mild washing and dry fully.
• Replace pleated filter paper if oil, water, or tears are present.
• Retighten clamps and check adapter seals after first few hours of operation.

Who is this for: This adapter kit is intended for owners and hobbyists who run Predator-style 212cc/196cc engines or Honda GX160/GX200 clones in go-karts, mini bikes, small ATVs and utility machines and who want a durable, higher-flow intake solution. Choose this kit if you need an upgrade that combines a larger-diameter intake, reinforced metal hardware and a practical installation package—just confirm compatibility with your carburetor flange and engine model before ordering.