LE KAPMOZ Heavy Duty V-Ring Truck Bed Tie-Down Anchors 10-Pack — 1,000 lb WLL, Black Steel

LE KAPMOZ Heavy Duty Truck Bed V-ring tie-down anchors are bolt-on steel attachment points designed to secure cargo with a 3,000 lb assembly break strength and a 1,000 lb working load limit per anchor.

These black-coated, solid-steel V-ring anchors give you reliable, corrosion-resistant anchor points for pickups, trailers, vans and utility beds. Each ring is built from 1/4" diameter hardy steel with a compact footprint (about 2-1/8" x 2") and inner clearance sized to accept common straps, hooks and chains. Sold as a multi-pack, they turn any flat surface or rail into a robust tie-down system suitable for heavy loads and frequent use.

How strong are these V-ring anchors and what loads can I trust them with?

Each LE KAPMOZ V-ring is rated with an assembly break strength of 3,000 pounds and a safe working load limit of 1,000 pounds. When you mount multiple anchors, combine the working loads to understand total system capacity, while always following best tie-down practices.

• Assembly break strength: 3,000 lbs per ring
• Working load limit: 1,000 lbs per ring
• Ten anchors in the pack increase overall capacity when used correctly
• Constructed from 1/4" diameter high-strength steel for heavy-duty use

What surfaces and vehicles will these bolt-on anchors work with?

These anchors are designed to bolt to most wood or metal surfaces found on pickup beds, trailers, cargo vans, and enclosed trucks. They also pair with bed rail systems when mounted to appropriate T-slot cleats, but some vehicles require slight hole enlargement to fit bed bolts.

• Mount to metal or wood surfaces using bolts through the 13/32" hole
• Compatible with ratchet straps, cam buckles, rope, hooks, and chains
• Fits pickup beds, trailers, cargo vans, tailgates, and T-slot rail cleats
• Toyota Tacoma note: enlarge factory 13/32" holes to 1/2" for proper fit

How do I install these V-ring tie-downs and what tools are needed?

Installation is straightforward: secure each mounting bracket with a bolt or screw through the center hole and tighten to the surface. For Tacoma beds or other tight factory holes, drill the mounting hole to 1/2" so the bolts pass cleanly; use appropriate hardware rated for your load.

• Use 13/32" hole drilling or enlarge to 1/2" for specific truck beds
• Fasten with grade-rated bolts, washers and lock nuts for safety
• Hand or power tools: drill, socket/wrench set, torque to hardware specs
• Inspect mounts periodically and retorque after initial use

Will these anchors resist rust and outdoor wear?

Yes — each ring is finished with a durable black protective coating to reduce corrosion and surface wear in outdoor conditions. The protective paint extends service life when mounted on trailers and exposed truck beds, though routine inspection is recommended if used in salty or highly corrosive environments.

• High-quality black protective coating prevents rust
• Suitable for outdoor use and exposure to weather
• Periodic checks advised in coastal or salt-exposed conditions
• Replace damaged or heavily corroded anchors immediately

Who is this for? LE KAPMOZ bolt-on V-rings suit contractors, haulers, outdoor enthusiasts and pickup owners who need dependable, compact anchor points to secure motorcycles, ATVs, kayaks, lumber, equipment and general cargo. Choose this 10-pack when you want multiple mounting locations across a bed, trailer or van for flexible, heavy-duty load restraint. If you encounter missing parts or installation questions, LE KAPMOZ provides customer support to help get the anchors mounted and working safely.