LEDAUT Aluminized Heat Shroud Sleeve 1-1/4in I.D. x 10ft with 20 Stainless Ties, Reflective Fiberglass Insulation

LEDAUT aluminized heat shroud sleeve is a 1-1/4" inner-diameter, 10-foot high-temperature fiberglass tube with an aluminized outer face plus 20 stainless steel cable ties for protecting fuel lines, wires and hoses from radiant heat.

Engine bays, exhaust runs and tight engine compartments expose hoses, wiring and fuel lines to high radiant temperatures and grime. This LEDAUT Heat Shroud combines an aluminized outer layer with glass-fiber fabric and a hook-and-loop friendly overlap so you can install a continuous protective barrier quickly without cutting or sewing. The kit includes 10 feet of sleeving sized for common lines and 20 stainless cable ties sized 7.8 inches for secure mechanical fastening where needed.

How does this sleeve reduce heat transfer to nearby lines?

The aluminized outer face reflects radiant heat while the glass-fiber core resists conduction. Together they lower the thermal load on cables and hoses by creating a reflective, insulating barrier that reduces heat soak from headers or turbo plumbing.

• Aluminized outer facing reflects infrared heat.
• Glass-fiber body provides thermal insulation and abrasion resistance.
• Designed to lower radiative and convective heat exposure to routed lines.

Can I install the sleeve easily on existing hoses and wires?

Yes — the sleeve has an open edge and is designed for quick retrofitting around in-place lines. Use the overlapping construction for a snug fit, then secure with the supplied stainless steel cable ties or your preferred fasteners.

• Open-edge design lets you wrap around installed components without disconnecting them.
• Hook-and-loop friendly overlap for temporary or adjustable installs.
• Includes 20 stainless steel zip ties for permanent, corrosion-resistant fastening.

What are the material limits and safety considerations?

The sleeve is built from aluminized foil laminated to heat-resistant fiberglass with polyester backing; it resists oil and grime but is not fireproof. Avoid direct contact with open flames, red-hot surfaces, or continuous exposure above the stated working temperature to prevent damage.

• Working temperature range: -40°C to +160°C.
• Not intended for direct contact with flames or surfaces exceeding 160°C.
• Resists oil, chemicals, dirt and road grime; not a substitute for fireproof materials.

Will the sleeve fit the components I need to protect?

This kit is sized with a 1-1/4" inner diameter and a full 10-foot length, making it suitable for many common automotive and industrial runs. It fits fuel lines, brake lines, intake tubes, spark plug wires, battery cables, A/C hoses and similar-diameter components with room for overlap and fastening.

• 1-1/4" I.D. (approx. 32 mm) accommodates typical lines and grouped bundles.
• 10 feet (3 meters) length covers long runs or multiple short sections.
• Twenty 7.8-inch (200 mm) stainless steel cable ties included for secure mounting.

Who is this for: technicians, hobbyists and vehicle owners who need a practical, retrofittable thermal barrier for routed lines and wiring. If you maintain engines, turbos, exhaust systems, off-road rigs or industrial machinery and you want a reflective, abrasion-resistant wrap that’s easy to install and resists oil and grime, this LEDAUT heat shroud kit gives you a balanced combination of protection, length and mounting hardware for typical automotive applications.