LIMICAR LED Trailer Light Kit with 15" 11-LED Brake Bar — Submersible 25ft Harness & DOT Rear Lights

The LIMICAR LED Trailer Light Kit is a complete, submersible 12V lighting system that replaces rear combination lights, marker lights, a 15" 11-LED center brake/ID bar, and includes a 25ft protected wiring harness plus mounting hardware.

This all-in-one kit simplifies trailer lighting upgrades by supplying every component required for safe towing: two DOT-style square rear combination lights, six amber/red marker and clearance lights, a 15-inch 11-LED third brake/ID bar, a heavy-duty 25-foot wiring harness inside a protective wire loom, a license plate bracket with illumination, and the fasteners for installation. Designed for boat trailers and other tow vehicles exposed to wet or corrosive conditions, the system emphasizes long-term reliability with fully sealed housings and corrosion-resistant wiring protection.

How does this kit improve visibility while towing?

The LIMICAR kit provides full rear lighting functions—running lights, brake lights, turn signals, and reflex—plus dedicated license plate illumination and marker lights to make the trailer more visible in traffic and low-light conditions. The included 15" 11-LED bar places an extra high-mounted brake/ID light where drivers are most likely to see it.

• DOT-style rear combination lights deliver brake, tail, and turn signal functions.
• 11-LED 15" center brake/ID bar increases high-mounted brake visibility.
• Six marker/clearance lights add side and rear identification for legal compliance.
• Dedicated license plate light keeps registration visible at night.

Will the lights survive launches, rain, and road spray?

Yes — the kit is built to handle wet environments. Each lamp housing is fully sealed against water, sand, and snow, and the wiring harness is enclosed in a heavy-duty loom to prevent moisture ingress and abrasion that commonly cause electrical failures.

• Sealed light housings resist water and debris during launches and washdown.
• Wire loom-jacketed harness protects conductors from chafing and corrosion.
• Corrosion-resistant connectors and hardware extend service life in coastal areas.
• Designed specifically with boat trailers and wet-use towing in mind.

How easy is installation for a typical trailer owner?

The kit is designed for straightforward retrofit or replacement on 12V trailer electrical systems. Components come with mounting hardware and a 25-foot wiring harness long enough for most trailer lengths, and color-coded wiring aligns with standard trailer circuits for easier hookup.

• Complete hardware and license plate bracket included—no extra parts needed.
• 25ft harness covers small to medium trailers without splice extensions.
• Standard trailer color-coding simplifies electrical connections.
• Plug-and-play compatibility with most 12V trailer electrical systems when mounting positions permit.

What types of trailers are compatible with this lighting set?

The LIMICAR kit fits a wide range of 12V trailer types where the light sizes and mounting locations match—especially boat trailers, utility trailers, cargo trailers, snowmobile trailers, and RV tow setups. Confirm mounting hole patterns and available mounting surface before ordering.

• Designed for 12V DC systems on boat and utility trailers.
• Suitable for cargo, snowmobile, and light RV/camper trailers.
• Measure mounting area for 15" brake bar and square tail lights prior to installation.
• Works best where sealed, durable lighting is needed due to exposure to water or road salt.

Who is this for? The LIMICAR LED Trailer Light Kit is aimed at boat owners, weekend haulers, and fleet operators who need a reliable, weatherproof lighting solution that replaces an entire trailer light system at once. It’s ideal for anyone who launches or tows in wet, coastal, or winter conditions and wants an upgrade from aging, corroded lights and bare-wire harnesses to a protected, DOT-style LED setup that reduces maintenance and improves visibility.