Lisle 61040 65mm 14-Flute End Cap Wrench for Toyota & Lexus — Forged Steel, 3/8" Drive Compatible

Lisle 61040 is a forged 65mm, 14-flute end cap wrench designed to remove and install Toyota and Lexus cartridge oil filter housings quickly and reliably.

This compact, high-strength tool fits the 65mm, 14-flute designs used across many Toyota and Lexus engines and is built for workshop durability. The Lisle 61040 engages either the ribs or the flutes on the filter cap housing so you can apply torque safely with a 3/8" square drive or a 1-1/16" wrench. Its forged-steel core and bright chrome plating resist shop wear while delivering a precise fit that reduces slippage and damage to plastic or metal caps.

Which Toyota and Lexus engines will this wrench fit?

The Lisle 61040 is made for 65mm caps with 14 flutes, commonly found on many 6- and 8-cylinder Toyota and Lexus cartridge-style filters. It also works on a range of 4-cylinder engines that use the same 14-flute cap geometry, including many 1.8L, 2.5L and some 2.7L applications.

• Fits 65mm, 14-flute cartridge oil filter caps
• Engages ribs and flutes on 6- and 8-cylinder engines
• Compatible with many 1.8L, 2.5L and some 2.7L 4-cylinder models
• Check cap measurements and flute count before purchase

How should I use the Lisle 61040 for safe removal?

Attach the wrench to a 3/8" drive ratchet or a 1-1/16" open wrench and seat it squarely onto the filter cap so the flutes engage fully. Apply steady, controlled torque; the forged construction transfers force evenly to avoid cracking plastic housings or rounding flutes.

• Use 3/8" square drive or 1-1/16" wrench as required
• Ensure full engagement of flutes or ribs before turning
• Apply steady torque, avoiding sudden jerks
• Inspect cap for cracks before reinstalling

What are the wrench’s construction and durability features?

The tool is forged from steel for strength and finished with bright chrome plating to resist rust and ease cleanup. The precise flute profile reduces slip and concentrates contact on the cap’s reinforcement points rather than thin plastic surfaces.

• Forged steel body for high torsional strength
• Bright chrome-plated finish for corrosion resistance
• Exact 65mm, 14-flute profile for accurate engagement
• Compact design fits tight engine bay spaces

Which accessories or precautions should I consider?

Pair this end cap wrench with a low-profile 3/8" ratchet for access in confined engine compartments and a torque wrench if reinstalling to manufacturer specs. Avoid over-torquing on plastic caps and inspect the filter housing threads and sealing surfaces before reassembly.

• Recommended: 3/8" low-profile ratchet and breaker bar for stuck caps
• Use torque wrench when tightening per vehicle specs
• Inspect housing seals and drain any trapped oil first
• Store in tool chest to protect the chrome finish

Who is this for: The Lisle 61040 end cap wrench is intended for professional mechanics, DIY enthusiasts, and fleet technicians who service Toyota and Lexus vehicles using 65mm, 14-flute cartridge oil filters. It’s a practical addition for anyone who needs a durable, accurate removal tool to prevent damage to filter housings and speed routine oil service tasks.