LIZEWEI 1" Go-Kart Live Axle Bearing Kit — Azusa-Style 3-Hole Flange, Sealed Bearings & Hangers

LIZEWEI's 1-inch Go-Kart Live Axle Bearing Kit is a complete mounting solution for live axles that fits Azusa-style axles and vehicles using three-hole bearing flanges.

This kit supplies the bearings, hangers, flangettes and hardware needed to mount a 1" live axle on go-karts, mini bikes, trikes and small off-road ATVs. Built from hardened steel and sized for a 3" bolt circle on the flange, the set aims to replace worn axle supports or to convert a bare axle into a reliable rotating assembly. The components arrive ready to install and are intended for hobbyists, repair shops and DIY builders who need a compact, durable bearing solution.

How does this kit fit Azusa-style axles and similar shafts?

The hangers accept three-hole bearing flanges that are drilled on a 3" bolt circle, matching the common Azusa mounting pattern. Bearings are pressed into the hangers and the supplied flangettes secure the bearing flange to the hanger. This makes alignment straightforward for most standard 1" live axles.

• Fits 1" diameter live axles and Azusa-style mounting patterns
• Hangers accept three-hole flanges on a 3" bolt circle
• Includes axle locknuts sized for 3/4" threaded axle ends

What parts come in the LIZEWEI live axle bearing kit?

The kit contains everything required to mount both ends of a live axle: two bearings, two hangers, four three-hole flangettes, six mounting bolts with locknuts, and two 3/4" axle locknuts. That reduces the need to source additional fasteners or adapters during installation. Hardware is grouped to simplify assembly and get the axle turning quickly.

• 2 x sealed bearings for rotating support
• 2 x steel bearing hangers for chassis mounting
• 4 x three-hole flangettes to mate flanges to hangers
• 6 x bolts with locknuts plus 2 x 3/4" axle locknuts

How durable and maintenance-friendly is the assembly?

Components are manufactured from high-strength steel designed to resist wear under light off-road and recreational loads. Sealed bearings reduce the frequency of lubrication and protect against dust and moisture commonly encountered during karting and trail use. When routine inspection is followed, you can expect extended service life from the hardware and bearings.

• High-strength steel construction for longevity
• Sealed bearings minimize contamination and maintenance
• Replaceable hangers and flangettes allow targeted service

What mounting details should I check before buying?

Confirm your axle diameter is 1" and that your vehicle uses a three-hole flange pattern on a 3" bolt circle to ensure compatibility. Verify the axle threads match the included 3/4" locknuts or plan to use your existing axle nuts if different. Also measure available chassis space so the hangers can be bolted in without interference.

• Axle diameter must be 1" for correct fit
• Flange mounting pattern: three holes on 3" bolt circle
• Confirm axle thread size or have appropriate locknuts ready

Who is this for: The LIZEWEI 1" Go-Kart Live Axle Bearing Kit is aimed at go-kart builders, mini-bike and trike owners, small ATV hobbyists, and repair shops that need a compact, off-the-shelf axle support solution compatible with Azusa-style flanges. It suits anyone replacing worn hangers or converting a plain axle into a supported live axle where a three-hole flange mount and a 1" shaft are used.