LKSM 428H 130-Link Motorcycle Chain — Gold Zinc Plated with Chain Breaker Kit

LKSM 428H Motorcycle Gold Chain is a 130-link, high-tensile steel drive chain with gold zinc plating, supplied with a chain breaker and 10 connector links for accurate sizing and straightforward installation.

This complete chain kit is built to replace worn drive chains on small-displacement motorcycles, mini bikes, go-karts and many Chinese ATVs. The 428H-130 specification matches the pitch and length requirements commonly found on 125cc, 150cc and 200cc engines, while the included chain breaker tool and connector links let you size and join the chain without extra trips to the shop.

Will this LKSM 428H chain fit my 125cc or 150cc bike?

The 428H-130 chain is designed to fit many 125cc, 150cc and 200cc drive systems that use a 428H pitch and width. Measure your current chain pitch and count or compare sprocket tooth compatibility before ordering to be certain.

• Specification: 428H-130 (130 links total)
• Engine range: commonly used on 125cc, 150cc, 200cc engines
• Models: compatible with SSR, TaoTao, Coolster, Apollo, Baja, Kazuma and similar makes
• Tip: match sprocket pitch (428) for a correct fit

How durable is the gold zinc-plated chain for everyday riding?

Manufactured from high-tensile steel and finished with gold zinc plating, the chain resists surface corrosion and provides improved wear resistance versus unplated links. The plating also gives a clear visual cue for inspection and a stylish look that holds up under normal road and off-road use.

• Material: high-tensile steel core for strength
• Finish: gold zinc plating for corrosion resistance
• Maintenance: clean and lubricate per manufacturer guidance to extend life
• Use case: suitable for street, trail and light off-road conditions

What tools and parts come with the LKSM 428H chain kit?

The kit is supplied ready for installation with a chain breaker and connector links so you can shorten and rejoin the chain on-site. That reduces the need for additional tools and makes accurate length adjustment easier during fitment.

• Included: 1 pcs 428H bike chain (130 links)
• Tool: 1 pcs 420–530 chain breaker for cutting and pin removal
• Hardware: 10 pcs 428H connector links for secure joining
• Note: basic hand tools still recommended for sprocket removal and final tensioning

How do I install and size this chain correctly?

Use the included chain breaker to remove excess links and then fit a connector link to rejoin the chain. Set proper chain tension according to your motorcycle’s owner manual and double-check alignment with the front and rear sprockets before first ride.

• Step 1: Measure required length against old chain or sprockets
• Step 2: Use chain breaker to remove surplus links carefully
• Step 3: Insert connector link and secure per connector instructions
• Step 4: Adjust tension and re-check alignment and torque on fasteners

Who is this for — Riders who need a reliable, easy-to-fit replacement chain: This LKSM 428H gold chain kit is aimed at owners of mini bikes, dirt bikes, go-karts and Chinese-made ATVs who want a direct-fit, durable chain with the tools to cut and join it themselves. It's ideal for home mechanics, track-day enthusiasts, and service shops working on 125–200cc machines that accept a 428H-spec chain.