Magnadyne Multi-Device RV Wall Charger — Black with USB-C, USB-A & 12V/24V VPA (10A)

Designed for RV owners who need flexible on-board power, this black Magnadyne wall charger replaces or supplements existing cabin outlets to deliver simultaneous charging for phones, tablets, and heavier 12V/24V accessories. It combines a fast USB‑C port, a legacy USB‑A port, and a VPA socket capable of delivering up to 10 amps at 12V (or 5 amps at 24V). The integrated LED indicator offers quick visual confirmation that the unit is powered and ready.

How will this charger simplify charging multiple devices on the road?

The Magnadyne wall charger consolidates three charge points into a single recessed wall unit so you can run a phone, a tablet, and an accessory simultaneously without swapping adapters. Its power distribution is balanced for practical everyday use in typical RV electrical configurations.

• Three ports: USB‑C (12V/2.25A), USB‑A (12V/1.5A), plus VPA socket (12V/10A or 24V/5A).
• Charge up to three devices at the same time without occupying separate outlets.
• Built-in LED shows when the charger is energized.

Will this support fast charging for modern phones and tablets?

The USB‑C port supports higher current delivery than the USB‑A port, enabling quicker recharge for devices that accept USB‑C fast charge profiles. For older devices that require USB‑A, the dedicated port provides reliable compatibility.

• USB‑C rated 12V/2.25A for faster recharging of compatible devices.
• USB‑A rated 12V/1.5A for legacy phones, cameras, and accessories.
• Use device cables to leverage each port's optimum charging rate.

What types of RV equipment can run from the VPA socket?

The VPA socket delivers a high-current feed suitable for medium-draw RV accessories such as small fans, portable fridges, pumps, or lighting modules that operate on the coach power bus. Rated at 10 amps for 12V systems (and 5 amps for 24V), it handles devices that need more than standard USB output.

• High-capacity VPA: 12V/10A for heavier 12V accessories.
• Supports 24V systems at a reduced 5A output when applicable.
• Avoids overloading USB ports by routing high-draw accessories to the VPA socket.

How is this unit installed and how will I know it’s powered?

The charger installs in a standard recessed RV wall box or an existing compatible cutout and wires into the vehicle's 12V/24V distribution system. Once connected, the integrated LED power indicator provides an immediate visual cue that the unit has incoming power.

• Designed for in-wall mounting in RV cabins or utility compartments.
• Wires to the coach's 12V or 24V power bus per installation instructions.
• LED indicator confirms operational status at a glance.

Who is this product for? The Magnadyne Multi-Device RV Wall Charger is made for RV owners, vanlifers, and mobile technicians who need a tidy, reliable way to charge personal electronics and run medium-power accessories without juggling adapters. It’s especially useful for travelers upgrading older RV wiring to support USB‑C devices, people who want a dedicated high-current VPA outlet for appliances, and anyone seeking a low-profile, multi-port solution to reduce clutter and maximize on-board power efficiency.