Malco Tru Grit Heavy-Duty Buffing & Polishing Compound — 32 oz, Water-Based, Cuts 1000-1500 Grit Scratches

Malco Tru Grit is a heavy-duty, water-based buffing and polishing compound engineered to remove 1000–1500 grit sand scratches, heavy oxidation, and paint defects on automotive, marine, and industrial finishes.

If you need a powerful abrasive compound that tackles deep sanding marks and stubborn surface damage without waxes or silicones, Malco Tru Grit delivers a concentrated, diminishing-abrasive formula designed for both repaired and fully cured clearcoats. Made in the U.S.A., this 32 oz container is formulated to work on high-solids and standard clears and cleans up with water for easy post-polish detailing.

How does Malco Tru Grit remove deep sand scratches and oxidation?

Tru Grit uses a controlled, heavy-duty abrasive that gradually breaks down as it cuts, allowing you to remove coarse sanding lines while refining the finish. It’s designed to smooth 1000–1500 grit sanding marks and reduce visible oxidation without leaving waxy residues that hide defects.

• Designed for 1000–1500 grit sand scratches and heavier defects.
• Diminishing abrasives cut aggressively then polish finer as you work.
• Effective on both freshly cured and fully cured clearcoats.
• Water-based for straightforward cleanup; no waxes or silicones to interfere with follow-up coatings.

Which surfaces and paint systems are compatible with this compound?

Malco Tru Grit is formulated for a broad range of painted substrates including automotive and marine finishes plus many industrial coatings. It works on high-solids clears and standard clears, and it’s safe for use after repair blocking, sanding, or heavy oxidation removal when used as directed.

• Automotive factory and aftermarket clearcoats.
• Marine topsides and other gelcoat-compatible finishes.
• Industrial painted surfaces where heavy abrasion is required.
• Can be used on both freshly cured (24 hours) and fully cured finishes.

What is the best way to apply Tru Grit for consistent results?

Apply a moderate amount of compound to a clean pad and work in small sections using a variable-speed polisher or by hand for spot corrections. Begin at lower speeds to spread the compound, then increase speed as needed to cut; finish with lighter passes to refine gloss and wipe residue with clean microfiber towels.

• Start on a low speed to distribute product, then increase for cutting action.
• Work in overlapping passes and keep the pad flat to avoid edge burn.
• Use fresh microfiber towels to remove residue and inspect work between passes.
• Follow with a finish polish if higher gloss or hologram removal is desired.

Who this product is for: Malco Tru Grit is aimed at professional detailers, body shop technicians, and experienced DIYers who frequently repair or restore paint and need a dependable compound for aggressive scratch removal and heavy oxidation correction. If you want a U.S.-made, water-cleanup compound that handles coarse sanding marks on a variety of clears and coatings, this 32 oz formula gives concentrated cutting power without waxes or fillers that can mask surface problems.