MAXRACING 2" Front Leveling Kit for Chevy Silverado & GMC Sierra 1500 2007-2026, 2 Inches Front + 0 inch Rear, bolt-on fits 32" ti

MAXRACING’s 2-inch front leveling kit raises the front of compatible 2007–2026 GM 1500 trucks and SUVs by a true 2 inches for a leveled stance and extra clearance.

This kit is engineered to bolt directly to factory steel lower control arms on select Chevrolet and GMC 1500 models, correcting factory rake and giving your vehicle a balanced, aggressive look without disassembling the struts. It accepts up to a 32" overall tire and is optimized for recommended 285/75 R17 tires. Designed for DIY installation, most installs take 2–4 hours with basic tools and the included hardware.

Which vehicles and trims does this MAXRACING leveling kit fit?

The kit fits many 2007–2026 Chevy and GMC 1500 models equipped with factory steel front lower control arms. It is not universal; several trims and model years are excluded.

• Compatible: Avalanche 1500 (2007–2013), Silverado 1500 (2007–2026), Suburban 1500 (2007–2020), Tahoe (2007–2021 depending on drivetrain), Sierra 1500 (2007–2026), Yukon/Yukon XL 1500 (2007–2020/2021 depending).
• Not compatible with: 2014–2018 Denali, 2007 Classic, ZR2/TrailBoss/AT4, MagneRide suspension, certain 2019–2020 new body style 4WD models.
• Only fits vehicles with factory steel front lower control arms; verify your trim and suspension before ordering.

How much lift and tire clearance will I gain?

Installed on a compatible vehicle, the kit produces a true 2" front lift and restores a level profile with the rear. Because of suspension geometry, the spacer’s material thickness is slightly less than 2", yet it provides a full 2" of vehicle height once mounted.

• True front lift: 2 inches once installed.
• Maximum tire overall diameter: up to 32".
• Recommended tire: 285/75 R17 for optimal fit and clearance.

What’s included and how difficult is installation?

The MAXRACING kit ships with the front lower strut mount extensions and all necessary fasteners and instructions. No strut disassembly is required; the kit is designed for a straightforward bolt-on installation for owners comfortable with basic suspension work.

• Included parts: 2 spacers, 4 bolts, 8 washers, 4 nuts, and installation instructions.
• Estimated install time: 2–4 hours using common tools and a jack/stands.
• Requires verifying factory steel lower control arms pre-installation.

What practical benefits will I notice after installing this leveling spacer?

Beyond the visual improvement of a level stance, the kit raises the front for better approach clearance and reduces the factory nose-down appearance. It’s a low-cost way to accommodate larger tires and improve the vehicle’s presence without altering rear ride height.

• Eliminates factory rake for a balanced look front-to-rear.
• Increases ground clearance and approach angle slightly.
• Simple bolt-on design with no strut disassembly required.

Who is this for: This MAXRACING 2" front leveling kit is for owners of compatible 2007–2026 Chevy Silverado, Sierra, Tahoe, Yukon, Suburban, and Avalanche 1500 trucks/SUVs who want a level stance, room for up to 32" tires, and a quick bolt-on solution. It is not intended for vehicles with MagneRide, TrailBoss, AT4, ZR2, specific Denali or Classic trims, or those with non-steel lower control arms—confirm fitment before purchase.