MONST Washer Water Inlet Valve Replacement 5220FR2075L Cold / 5220FR2006H Hot — OEM Fit, Solenoid-Controlled 110/120V

These MONST water inlet valves (5220FR2075L for cold, 5220FR2006H for hot) replace faulty washer inlet assemblies to restore reliable water fill and stop leaks or overfilling.

If your washer won't stop filling, leaks at the hose connection, or fails to route cold or hot water correctly, a worn inlet valve is a common cause. MONST offers two compatible replacement valves: 5220FR2075L designed for cold water and multi-outlet distribution, and 5220FR2006H built for hot water with a reinforced inlet strainer. Both are manufactured to match OEM fit and electrical specifications for many Kenmore and similar washers, making DIY repair straightforward and cost-effective compared to replacing the whole appliance.

How do these valves fix common washer filling problems?

Replacing a failing inlet valve addresses symptoms like continuous filling, intermittent water flow, or visible leaks where the hose attaches. The solenoid-controlled valves restore correct timing and shutoff of incoming water when the machine signals filled level.

• Solenoid-actuated operation on AC 110/120V, 50–60Hz for consistent response.
• 5220FR2075L: three outlets arranged at a 45° angle for pre-wash, main fill, and bleach distribution.
• 5220FR2006H: includes a metal strainer at the hot inlet to reduce debris entry and protect internal components.
• Direct bolt-on replacements for many Kenmore and compatible model numbers listed below.

Which washer models and replacement numbers are compatible?

MONST designed these inlet valves to be compatible with a wide list of Kenmore and related washer part numbers and model families. Check your machine's model plate and existing inlet part number to confirm compatibility before ordering.

• 5220FR2075L cold valve compatible with models like 796.40021.900, WM1812CW, WM2016CW and replacements such as 5221ER1003A/C/D/F, 4322702.
• 5220FR2006H hot valve fits models including 796.40272.800, CW2079CWD and replacement numbers like H5220FR2006L, AP4441935, PS3527427.
• Both valves meet common electrical and mounting specifications used across many appliance lines.
• Refer to your washer’s service manual or the part printed code to ensure exact match.

What should I expect during installation and maintenance?

Installing these inlet valves is typically a straightforward repair for anyone comfortable with basic appliance work. Turn off water and power first, then disconnect hoses, remove the old valve, and swap in the MONST unit following OEM mounting and wiring positions.

• Shut off water supply and unplug washer before starting the job.
• Note and reconnect electrical connectors and hose fittings to original positions.
• Test for leaks and proper fill cycles after installation and before reassembling panels.
• Clean or replace inlet screens periodically to extend valve life (5220FR2006H includes a metal strainer).

How do I choose between the cold and hot valve options?

Pick 5220FR2075L when replacing the cold/multi-outlet inlet assembly and 5220FR2006H when replacing the hot-only inlet with a hose fitting and strainer. Use the part number printed on your old valve and the geometry of the hose fittings to match the correct piece.

• Choose 5220FR2075L for cold fill, pre-wash and bleach feed applications (three-outlet layout).
• Choose 5220FR2006H for hot water inlet with built-in metal strainer and single hose fitting.
• Confirm electrical rating (AC 110/120V, 50–60Hz) and mounting bracket style for compatibility.

Who this is for: Homeowners, landlords, and appliance technicians who need a reliable, OEM-style replacement inlet valve for Kenmore and compatible laundry machines. This pair of MONST parts suits anyone aiming to repair a washer that leaks, continually fills, or fails to supply hot or cold water correctly — enabling an affordable, practical fix without professional service when you follow safety precautions.