Mopar Full Synthetic Oil Change Kit for Dodge Ram 2500-5500 6.4L Hemi (2014–2019) — OEM Oil & Filter with Drain Hardware

This Mopar OEM full synthetic oil change kit supplies the correct synthetic oil, filter, and necessary drain components to service 2014–2019 Dodge Ram 2500–5500 trucks with the 6.4L Hemi engine.

Keep your Ram's 6.4L Hemi running on manufacturer-approved fluids and parts with this complete Mopar oil change kit. It bundles the exact full synthetic engine oil viscosity, the genuine Mopar oil filter, and any OEM-specified drain hardware so you get a fast, correct service without hunting for parts. Using the right combination of Mopar components helps maintain engine protection, preserve warranty compliance when applicable, and simplify routine maintenance.

What parts are included in this Mopar 6.4L Hemi oil change kit?

The kit contains the specified full synthetic engine oil amount, a Mopar-branded oil filter matched to the 6.4L Hemi, and any required drain plug washer or hardware specified by Mopar for these model years. Everything is chosen to meet factory specifications so installation is straightforward.

• Manufacturer-grade full synthetic engine oil at the correct viscosity for 6.4L Hemi engines.
• OEM Mopar oil filter engineered for fit and filtration on Ram 2500–5500 models.
• Drain plug washer or related small hardware when required for a complete change.
• Packaging labeled with Mopar part numbers for easy verification.

How do I use this kit to change oil on a Ram 2500–5500 6.4L Hemi?

Performing the oil change follows the same service steps you’d use with separate components, only simpler because quantities and parts are preselected. Warm the engine, safely lift or access the drain area, drain the old oil, replace the drain washer if included, install the Mopar filter, refill with the supplied synthetic oil, and check levels.

• Warm engine for easier oil flow; shut off and secure vehicle.
• Drain oil, replace washer if included, tighten drain plug to spec.
• Swap in the Mopar oil filter and torque as recommended.
• Refill with supplied synthetic oil and verify level after running briefly.

Why choose a Mopar OEM kit instead of aftermarket parts?

Mopar kits use factory-approved fluids and filters engineered for Chrysler-built engines, which reduces compatibility guesswork and supports correct service intervals. OEM parts are designed to meet the vehicle manufacturer’s tolerances and filtration standards, making them a convenient choice for owners who prefer manufacturer-specified maintenance.

• Exact fit and filtration characteristics for the 6.4L Hemi.
• Factory viscosity and additive package for Chrysler engine specifications.
• Simplifies parts matching and can help with warranty documentation.
• Reduces the risk of cross-compatibility errors during service.

How often should I use this kit for routine maintenance?

Follow the service interval recommended in your truck’s owner manual or as indicated by the oil life monitoring system; many heavy-duty 6.4L Hemi maintenance schedules recommend intervals based on driving conditions and load. Use this kit at each scheduled oil service to ensure consistent fluid quality and filtration performance.

• Refer to the owner manual for mileage or oil life percentage triggers.
• More frequent changes for severe duty, towing, or heavy loads.
• Keep service records showing Mopar OEM parts used for each change.
• Inspect oil and filter between services if operating in extreme conditions.

Who is this kit for: Mopar’s full synthetic 6.4L Hemi oil change kit is aimed at owners and technicians servicing 2014–2019 Dodge Ram 2500 through 5500 trucks who want an OEM-specified, all-in-one maintenance solution. It’s especially useful for fleet managers, DIYers who value time and correctness, and professional shops that prefer factory parts for consistent results and easy verification.