MOTO1988 Rear Axle Wheel Bearing & Seal Kit for Honda Recon 250 / TRX250X — Complete Rear Hub Bearings, Seals & Clips (1997–2022)

MOTO1988's rear axle and brake drum wheel bearing, seal, clip and O‑ring kit supplies the exact bearings and seals needed to service Honda Recon 250 and Sportrax/TRX250X rear hubs across many model years.

This complete aftermarket kit bundles bearings, dust seals, O‑rings, a circlip and a bearing clip intended to replace worn rear hub components on select Honda ATVs. It’s built to match OEM dimensions and replacement part numbers so you can refresh the rear axle assembly without hunting down multiple pieces. The kit is suitable for routine maintenance, rebuilds after water or dirt exposure, and restoring play-free wheel rotation.

Which Honda models and years will this kit fit?

The MOTO1988 kit is designed for Honda Recon 250, Sportrax 250 and TRX250X model ranges over multiple years. Verify compatibility with your ATV by cross-checking the listed model years and OEM numbers before purchase.

• Recon 250: 1997–2009 and 2011–2022
• Sportrax 250: 2001–2008
• TRX250X: 2009, 2011–2014, 2016–2022
• Check OEM reference 91208-HF7-005 and replacement part numbers for confirmation

What specific parts are included in the package?

The set contains all primary wear items typically replaced when servicing a rear hub assembly, so you get the bearings and seals required for a full rear axle refresh. Each component is dimension-specified for correct fitment.

• Bearing (32 x 58 x 13) × 3
• Dust seal (32 x 58 x 10) × 1; Dust seal (43 x 58 x 10) × 1
• Brake cam dust seal × 1; dust seal (14 x 20 x 4) × 1
• O‑rings: (166 x 2.6) × 1 and (75 x 3.2) × 2; inner circlip (58 mm) × 1; bearing clip × 1

How do I confirm these are the right replacement parts for my ATV?

Match the OEM or replacement part numbers and compare the bearing/seal dimensions to your existing parts. Visual comparison and measuring diameters or widths helps avoid ordering errors.

• Confirm OEM reference: 91208-HF7-005
• Cross-check replacement numbers listed with your service manual
• Measure existing bearing sizes (32x58x13) and seal dimensions before installation
• If unsure, contact seller support with photos and model/year details

What should I expect during installation and post-purchase support?

Installation follows standard rear hub/service procedures: remove wheel, disassemble hub, replace bearings and seals, then reassemble with proper torque and grease. MOTO1988 offers guidance and a one-year product service window if parts have issues.

• Use appropriate press or driver tools for bearings to prevent damage
• Clean hub bores thoroughly and inspect for scoring or runout
• Apply correct grease and torque specs per Honda service manual
• Contact MOTO1988 via email for customer service and support

Who is this for? This kit is aimed at DIY mechanics, ATV enthusiasts, and maintenance shops that service late-1990s through recent-model Honda Recon 250, Sportrax 250 and TRX250X rear hubs. It’s especially useful for riders replacing water-damaged bearings, restoring loose rear hubs, or performing scheduled rear-axle maintenance who want a single, complete kit matching OEM dimensions and replacement references.